Hello guys,
I am dealing with very strange problem. I have old HP Compaq 6300. I was installing clean Windows 10 install on SSD disk. I have ended up with problem "Windows could not update the computer's boot configuration. Installation cannot". PC was stuck. So I have powered down computer and power UP. Then there was no screen, no bios, fans goes loud (power supply, CPU, and all mini fans). I unplug everything, reaseat RAM, tried another slot, another modul from second PC, clear cmos battery, power drain, nothing. So I replaced motherboard. After that PC boot up and I have started Windows 10 installation again. Same error poped up and PC was again dead, same scenario . So can someone explain to me this weard behavior? Looks like installation corupting HW. Can it be power supply problem?
I am dealing with very strange problem. I have old HP Compaq 6300. I was installing clean Windows 10 install on SSD disk. I have ended up with problem "Windows could not update the computer's boot configuration. Installation cannot". PC was stuck. So I have powered down computer and power UP. Then there was no screen, no bios, fans goes loud (power supply, CPU, and all mini fans). I unplug everything, reaseat RAM, tried another slot, another modul from second PC, clear cmos battery, power drain, nothing. So I replaced motherboard. After that PC boot up and I have started Windows 10 installation again. Same error poped up and PC was again dead, same scenario . So can someone explain to me this weard behavior? Looks like installation corupting HW. Can it be power supply problem?