Gtx 1050 ti

holljony87

Prominent
Sep 19, 2017
12
0
510
So, I am building my first PC
I did put my graphics card it, plugged in the PCI cable and when I start the PC, the fans spin for like a second or so and then stop. I tried getting the graphics card out and put it back in, but it does the same. Could there be something I did wrong?
 
Solution
Hey,
Pretty sure it is the GRAPHICS CARD.

That explains the video, and the audio could be explained by it simply making your system UNSTABLE thus the audio data is not sent fast enough to the audio processor thus it gets corrupted.

It definitely sounds like an RMA, but to CONFIRM that (or try at least) you can:

*Get a program for the card like MSI AFTERBURNER (not sure what Galax has) and downclock both the GPU and the VRAM (video memory). Go to 90%, or a few hundred MHz lower depending on what options the software has.

If the system becomes stable now then it proves the card can't handle its current clock. (if it still fails it's probably the graphics card but we didn't prove it. if it does NOT fail then it's proof.)


depends on the model he bought though, some had that feature, some don't

mine is a Galax 1050 TI OC 1 fan
and it's fan can't stop spinning nor can it be decreased below 40% speed

when ur fan stop spinning, r u still getting a display?
 

holljony87

Prominent
Sep 19, 2017
12
0
510


Oh, I feel stupid now!
Thanks for the help :)
 

holljony87

Prominent
Sep 19, 2017
12
0
510
So I got this new monitor and I do get a display with it, but exactly 5 minutes after I started my pc, it turns into a different color (red,blue or white for example) and I can't do anything with it.
Could it be because of the graphics card? It is a STRIX 1050GTX TI 4G
 


Is it always around 5 mins, no mater what you do on PC? Does PC seem to work otherwise? (Tip: turn on some music, if it continues to play after display goes to hell, that would indicate PC still works normally)
If answer is yes to both question, I would suspect something is not right with monitor.
 


I would first try to confirm the problem. Do you have any other source of display (console, TV decoder) to connect to monitor? If it behaves same with different device, that would proof it is indeed monitor's fault.
 

holljony87

Prominent
Sep 19, 2017
12
0
510


So the monitor worked with another pc just fine, but when I plug it in my pc, it is the same
 

holljony87

Prominent
Sep 19, 2017
12
0
510


The fan isn't spinning and it doesn't heat up, it only gets a bit warmer
 
I would not expect GPU to overheat in 5 min anyway, but the effect (especially timing) is somewhat curious. You mentioned another PC - can you put your GPU into in and check what happens? Also, did you used the same video cable with both machines? It would be very strange for cable to cause such effect, but not entirely impossible.
 
Troubleshooting the monitor (not necessarily in order):

First, based on the above comments it sounds like it is the GTX1050Ti graphics card. It's odd that the AUDIO is already screwed up. That could be coincidence as it's a new PC.

I assume you are using HDMI or DP and the audio is coming through the same cable as the video?

That could suggest the cable, but don't overthink it. In TROUBLESHOOTING we often swap parts starting with what's easiest or available, but if you have the PROPER PARTS the common method is the "HALF SPLIT METHOD" which for example means take the entire system (Monitor + PC) and then isolate which half the problem is in...

If the monitor (and same cable) works with another PC then it's the PC... then proceed to separate the VIDEO CARD from the rest of the system... for example if the iGPU works then it's likely the GTX1050Ti graphics card.

1. different graphics solution (graphics card OR, plug into the motherboard if you have an iGPU... that will use the CPU graphics. Ryzen has no graphics)

2. different cable

3. different CONNECTOR (i.e. HDMI instead of DisplayPort)

4. Different computer

5. Different monitor/HDTV
 

holljony87

Prominent
Sep 19, 2017
12
0
510
I am using a DVI-D cable
Today it worked for like 2-3 hours, I even got to try out games on it, I got solid 60FPS on Mount&Blade Warband with max settings and with a 400 men battle
As I was playing, the monitor became black and the sound got distorted (I am using a headset)
I restarted the PC and now my monitor says "No video input" again, just like the days prior.
I am starting to get really pissed off since this is the 4th day of struggle and I worked pretty hard this summer to get the money for it.
 


that's really weird, i have no experience on this one so helping u might take some time (i have to do research :eek:)

GPU is very unlikely to affect the sound (especially since u're using DVI)

i can be wrong though :eek:
 

holljony87

Prominent
Sep 19, 2017
12
0
510


I really appreciate all of the help you guys give me
 


do you have any beeper? that might help on finding out the source of the problem :)
if u don't have one, it's really cheap so buying one won't damage your wallet (or your economy) XD


by chance, perhaps this happens to you?
http://www.tomshardware.com/answers/id-1971411/audio-distortion-gpu.html
 

holljony87

Prominent
Sep 19, 2017
12
0
510


What kind of beeper? And what for? I'm not familiar with it :)))
 


u had an integrated graphic then?
u can run everything just fine?
if yes, then most likely it's a faulty card as u said
if no, gotta find dem beeper and see the error code then
 

holljony87

Prominent
Sep 19, 2017
12
0
510


I have an i3 7100 processor and the integrated graphics card is the Intel 630 if I am right, and yes, this runs well with no problems. So it is my graphics card?
 


since u're on the verge of returning it anyway, i think this worth a try: upgrading the motherboard BIOS

i had this kind of trouble (sort of) once, my new GTX 1050ti won't run in my system [ no sound distortion though], coz of 2 reason:
1. my monitor doesn't support the digital signal so i need an active adapter
2. my BIOS doesn't support it so i need a BIOS update

here's how to update it:
go to mobo's brand website
search for your mobo type
download the latest BIOS
let the process run (don't let your PC shuts down during that)
pray and hope it works after that

if not, time to RMA the GPU i guess..