Display isnt working with GPU <SOLVED>

rockenlukie · Sep 20, 2017

I just installed a new GTX 1050 ti into my new build, and the display isnt working. When i turn it on, everything lights up just fine but the keyboard and mouse, they light up for about 10 seconds, then turn back off. If i take out my gpu, everything works like a charm.. put it back in, there it goes again

Edit: Problem was my drivers not being fully uninstalled

PC Tailor · Sep 20, 2017

First I would ensure that your BIOS is updated to the latest version.
Do you have integrated graphics? Does the iGPU work normally?

It would be useful to have your full system spec also.

rockenlukie · Sep 20, 2017

PC Tailor :

My PC works like normal w/o the GPU, when i plug it in and turn on my pc, the display doesnt work and the keyboard and mouse turns on for ~10 seconds, then stops, and repeats.. i do have integrated graphics.
Specs:
Intel i5-2400
Gtx 1050 ti
Intel DQ67SWB3
Hyperx fury black 2x4 DDR3-1600
EVGA - 400W ATX psu
Thermaltake - V3 Black ATX Mid Tower Case

Ty for fast responce

PC Tailor · Sep 21, 2017

So your integrated graphics works normally? Just to clarify, you are plugging the display cable into the GPU, not the motherboard when you switch graphic types?

Have you updated BIOS to latest version?

rockenlukie · Sep 21, 2017

PC Tailor :

My integrated graphics is working, i plugged in the display to the GPU using a dvi d to vga, and my bios is updated to the latest version

PC Tailor · Sep 22, 2017

I would consider testing the PSU and the GPU. PSU may be functioning normally but may not be distributing enough power.

Are you able to try a different PSU to test or simply try the GPU in another PC?

Mousemonkey · Sep 22, 2017

rockenlukie :

The 1050Ti does not output a VGA signal which is why you are not getting a picture, use an active adapter or a monitor with a digital input.

rockenlukie · Oct 12, 2017

Mousemonkey :

Okay, so i plugged in a HDMI to my tv, and it worked.. which is cool, but now windows isnt booting, and its saying this

InitLogger: LoadConfiguraton() returns 0xe001003d
2017-10-11 21:31:12.191 Phase 0 : Starting Watch Dog Initialization :
2017-10-11 21:31:12.285 Phase 0 : Loading Config. . . (roots krnl, setup)
2017-10-11 21:31:12.504 Phase 3 : releasing subsystems objects.
2017-10-11 21:31:12.504 Phase 3 : releasing watch dog component.
2017-10-11 21:31:12.504 Phase 3 : releasing cfg interfaces

And stops there

Search

Display isnt working with GPU <SOLVED>

rockenlukie

Prominent

PC Tailor

Illustrious

rockenlukie

Prominent

PC Tailor

Illustrious

rockenlukie

Prominent

PC Tailor

Illustrious

Mousemonkey

Titan

rockenlukie

Prominent

TRENDING THREADS

Latest posts

Moderators online

Share this page