- Sep 22, 2017
- 1
- 0
- 510
Just got parts for a new build, and it gave a hardware failure code the first time I turned it on. Followed the advice on some older threads and "breadboarded" the build to test it a piece at a time. Also made sure everything was plugged in correctly.
When testing with just the motherboard, psu and processor, all the fans and lights come on, but I don't get any beep tones. So I'm pretty sure one of those three is culprit. I won't get to my main setup until later, so I can't really test them in another computer, so I was wondering what else I could to to try to figure out which has the issue.
One thing that sorta bothers me is how I would get beep tones after putting in ram if there is no memory failure code when the ram isn't there.
Thanks
Edit: parts list
AMD - Ryzen 3 1200 3.1GHz Quad-Core Processor
Asus - A320M-K Micro ATX AM4 Motherboard
Corsair - CSM 650W 80+ Gold Certified Semi-Modular ATX Power Supply
G.Skill - Ripjaws V Series 8GB (1 x 8GB) DDR4-2666 Memory
Western Digital - Caviar Blue 1TB 3.5" 7200RPM Internal Hard Drive
When testing with just the motherboard, psu and processor, all the fans and lights come on, but I don't get any beep tones. So I'm pretty sure one of those three is culprit. I won't get to my main setup until later, so I can't really test them in another computer, so I was wondering what else I could to to try to figure out which has the issue.
One thing that sorta bothers me is how I would get beep tones after putting in ram if there is no memory failure code when the ram isn't there.
Thanks
Edit: parts list
AMD - Ryzen 3 1200 3.1GHz Quad-Core Processor
Asus - A320M-K Micro ATX AM4 Motherboard
Corsair - CSM 650W 80+ Gold Certified Semi-Modular ATX Power Supply
G.Skill - Ripjaws V Series 8GB (1 x 8GB) DDR4-2666 Memory
Western Digital - Caviar Blue 1TB 3.5" 7200RPM Internal Hard Drive
Facebook
Twitter
Instagram