RAM model: HX318LC11FBK2/16
I recently bought a Hyper X Fury 8x2 with XMP frequency of 1866 MHz. My motherboard is a ASRock H97M-itx/ac which is so fucking shitty that it does not support any frequencies above 1600 MHz. So I thought I'd make the most out of this mistake of buying RAM higher than what I can support by downclocking the frequency and decreasing the delay of the RAM.
Currently my RAM timings are:
DDR3L-1600 CL9-9-9 @1.35V
tRAS: 28
tRFC: 200
CR: 1T
The memory supports DDR3L-1866 CL11-11-11 @1.35V as XMP and JEDEC/PnP: DDR3L-1866 CL11-11-11 @1.35V/1.5V, DDR3L-1600 CL10-10-10 @1.35V/1.5V, DDR3L-1333 CL8-8-8 @1.35V/1.5V
Currently, everything seems stable and I just want to know if I can lower the RAM timings further or is this fine enough?
FYI: There are no XMP/JEDEC profiles for 1600 MHz. I got those numbers from the manual.
I recently bought a Hyper X Fury 8x2 with XMP frequency of 1866 MHz. My motherboard is a ASRock H97M-itx/ac which is so fucking shitty that it does not support any frequencies above 1600 MHz. So I thought I'd make the most out of this mistake of buying RAM higher than what I can support by downclocking the frequency and decreasing the delay of the RAM.
Currently my RAM timings are:
DDR3L-1600 CL9-9-9 @1.35V
tRAS: 28
tRFC: 200
CR: 1T
The memory supports DDR3L-1866 CL11-11-11 @1.35V as XMP and JEDEC/PnP: DDR3L-1866 CL11-11-11 @1.35V/1.5V, DDR3L-1600 CL10-10-10 @1.35V/1.5V, DDR3L-1333 CL8-8-8 @1.35V/1.5V
Currently, everything seems stable and I just want to know if I can lower the RAM timings further or is this fine enough?
FYI: There are no XMP/JEDEC profiles for 1600 MHz. I got those numbers from the manual.