High Start Stop Count in WD Blue

parsserver.in

Prominent
Sep 6, 2017
4
0
510
hey guys. i have WD 750GB Blue 2.5" ***NEW*** in my Acer Laptop.
all S.M.A.R.T utilities shown the drive in Good, Perfect, Healthy Status.

SMART Utilities that i used for testing my drive :
Crystal Disk Info - Ashampoo HDD Control - HD Tune Pro - Hard Disk Sentinel Pro - WD Life Guard

i use my laptop all over the night and in the night silent i can hear all my drive noise and sounds.
in middle of working with corel draw and draw things without leaving mouse even 1 second i can hear my hard drive stop working and after a few seconds (5 or more) its start again.

here is my start stop count of hard drive in two days of work :
(04) Start/Stop Count 94 94 0 6558 ok
(04) Start/Stop Count 94 94 0 6745 ok


(09) Power On Hours Count 99 99 0 754 (32 Days) ok

187 start/stop in just 20 hours of working (10 Hours yesterday and 10 Hours Today)
is it normal guys? i think its not. i work with this laptop at least 4 years (with another hard drive) and never see something like this.

some interesting thing about it :
i think its just happening when i use corel draw or watch movie !
for example when i surf the web with fire fox my hard drive works without any stop and start!
is it possible or its happening all the time and i didn't notice it?

What should i do with this? leave it with this start/stop problem and use it or thinking of buy a new hard drive?

Complete SMART information :
Code:
HD Tune Pro: WDC WD7500BPVT-80HXZT3 Health

ID                              Current  Worst    ThresholdData     Status   
(01) Raw Read Error Rate        200      200      51       2        ok       
(03) Spin Up Time               183      173      21       1850     ok       
(04) Start/Stop Count           94       94       0        6745     ok       
(05) Reallocated Sector Count   200      200      140      0        ok       
(07) Seek Error Rate            200      200      0        0        ok       
(09) Power On Hours Count       99       99       0        754      ok       
(0A) Spin Retry Count           100      100      0        0        ok       
(0B) Calibration Retry Count    100      100      0        0        ok       
(0C) Power Cycle Count          100      100      0        983      ok       
(BF) G-sense Error Rate         1        1        0        234      ok       
(C0) Unsafe Shutdown Count      200      200      0        101      ok       
(C1) Load Cycle Count           169      169      0        94150    ok       
(C2) Temperature                108      99       0        39       ok       
(C4) Reallocated Event Count    200      200      0        0        ok       
(C5) Current Pending Sector     200      200      0        0        ok       
(C6) Offline Uncorrectable      100      253      0        0        ok       
(C7) Interface CRC Error Count  200      200      0        0        ok       
(C8) Write Error Rate           100      253      0        0        ok       

Health Status         : ok