I recently installed Intel Extreme Tuning Utility to try and overclock and when it asked me to restart, I did and my PC won't start up ever since. Fans would spin and everything else is as it should be, it's just there's no signal on my monitor, just a black screen.
I've tried taking the cmos battery out for 1min. 10mins. and an hour and then putting it back in, I've tried putting the bios config jumper pins from 1-2 to 2-3, I've tried taking it out so the 3 pins are exposed and put a usb and a cd with bios recovery files in them, but all I get is a black sreen, no signal. Any suggestions?
Motherboard is an Intel DX97TO
I've tried taking the cmos battery out for 1min. 10mins. and an hour and then putting it back in, I've tried putting the bios config jumper pins from 1-2 to 2-3, I've tried taking it out so the 3 pins are exposed and put a usb and a cd with bios recovery files in them, but all I get is a black sreen, no signal. Any suggestions?
Motherboard is an Intel DX97TO
Facebook
Twitter
Instagram