Hi,
It’s been awhile since the last time I build my own pc. But my son has been asking for a computer rig since months ago.
So yesterday went to computer shop, and we bought the parts, and hoping that we could assembly the computer together.
Here’s the part list:
Amd Ryzen 5 1600
Stock cooler (spyre)
Asus Strix B350-F gaming
Team Group pro dark ddr 4 3200 for ryzen (2x8gb)
XFR Radeon RX 580 8gb
LG 24inch computer monitor (hdmi)
However, the rig wont display boot sequence on the monitor. It said no signal.
Check all the connection, i think there’s nothing at fault. Then disassembly all and start from scratch. Starting from booting just the cpu+stock cooler, then turning it off, adding ram. Boot again, turned off again, add vga cards. No cigar.
When i tried to boot it, there’s no sound indicating trouble (i use the supplied optional mobo speaker).
There is one short low beep that i think indicating the system is entering bios?
Mobo Led is also turns solid orange on the bottom side (i think indicating that mobo have power?)
Other led is turning on the top side as follows when i tried to boot:
Orange led for ram turn on then off
Red led for cpu turn on then off
White led for bga turn on and stay solid
Yellowish led for boot turn on and stay solid
I found no explanation on the manual or online about this led signs. So it’s just my guess that there’s something wrong with the vga.
But there is no bios beep sound indicating vga not detected.
Already surf the boards looking for info. And try every possible method (checking hdmi cable connected to the vga card, reseating the vga card, reseting the clear bios jumper, take off the mobo battery and pit back on, using only one dimm, switching the tiny switch on the vga card and so on) and still the monitor wont display.
So I really appreciate it if you have any more ideas for me to try to troubleshooy this.
Thanks again.
It’s been awhile since the last time I build my own pc. But my son has been asking for a computer rig since months ago.
So yesterday went to computer shop, and we bought the parts, and hoping that we could assembly the computer together.
Here’s the part list:
Amd Ryzen 5 1600
Stock cooler (spyre)
Asus Strix B350-F gaming
Team Group pro dark ddr 4 3200 for ryzen (2x8gb)
XFR Radeon RX 580 8gb
LG 24inch computer monitor (hdmi)
However, the rig wont display boot sequence on the monitor. It said no signal.
Check all the connection, i think there’s nothing at fault. Then disassembly all and start from scratch. Starting from booting just the cpu+stock cooler, then turning it off, adding ram. Boot again, turned off again, add vga cards. No cigar.
When i tried to boot it, there’s no sound indicating trouble (i use the supplied optional mobo speaker).
There is one short low beep that i think indicating the system is entering bios?
Mobo Led is also turns solid orange on the bottom side (i think indicating that mobo have power?)
Other led is turning on the top side as follows when i tried to boot:
Orange led for ram turn on then off
Red led for cpu turn on then off
White led for bga turn on and stay solid
Yellowish led for boot turn on and stay solid
I found no explanation on the manual or online about this led signs. So it’s just my guess that there’s something wrong with the vga.
But there is no bios beep sound indicating vga not detected.
Already surf the boards looking for info. And try every possible method (checking hdmi cable connected to the vga card, reseating the vga card, reseting the clear bios jumper, take off the mobo battery and pit back on, using only one dimm, switching the tiny switch on the vga card and so on) and still the monitor wont display.
So I really appreciate it if you have any more ideas for me to try to troubleshooy this.
Thanks again.
Facebook
Twitter
Instagram