CPU only starts when the jumper is in 2,3 pins after starting again changing it to 1,2 pins

Toggle sidebar Toggle sidebar
S

slaveofexcellence

Prominent
Sep 24, 2017
1
0
510
Normally when i keep the jumper in 2,3 pins and after turning on the cpu changing it to default pins(1,2).Then the Cpu beeps and starts.

I also Updated the Bios.

My MotherBoard is ASUS F2A85-M LE.
AMD Radeon integrated Graphics
Corsair Vengeance 4GB RAM
 
Solution
M
If am following this convoluted process correctly, ....you have to completely reset/clear your BIOS every time to even start up your computer?

Try another BIOS battery, CR2032...they cost about $3-$4...

If the computer does not retain the settings from one shutdown to the next startup, the motherboard might be faulty...(assuming no shorted USB cables, components, etc.)
Sort by date Sort by votes
M

mdd1963

Titan
Jan 14, 2006
16,616
1,735
81,240
If am following this convoluted process correctly, ....you have to completely reset/clear your BIOS every time to even start up your computer?

Try another BIOS battery, CR2032...they cost about $3-$4...

If the computer does not retain the settings from one shutdown to the next startup, the motherboard might be faulty...(assuming no shorted USB cables, components, etc.)
 
Upvote 0 Downvote
Solution
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom