My custom built computer won’t turn on
- Thread starter xRaidiant
- Start date
- Sep 8, 2015
- 8,440
- 632
- 49,290
http://www.tomshardware.com/forum/261145-31-perform-steps-posting-post-boot-video-problems
this is the new system troubleshooter. go down the list step by step. this usually fixes most issues, if not post again. I'll be watching the thread. post full specs it will help.
this is the new system troubleshooter. go down the list step by step. this usually fixes most issues, if not post again. I'll be watching the thread. post full specs it will help.
Yes I connected 2 pins total from PSU to motherboard. I connected the cables from the case pc to mb. No power at all.
Specs:
CPU:Intel core i5 7600k
GPU:GTX 1060 6gb
Case:NZXT S340 Elite
Mobo:MSI Z270A Pro
Power Supply:EVGA 500W 80+ bronze certified
CPU Cooler:Hyper 212 Evo
I have decided to disassemble all the parts and manually test it to see if they have a short circuit or anything
Ok guys I figured out the problem. I took apart all the parts and the problem was that the case POWER SW wire was plugged into the wrong pin and when I plugged it in the right pin the motherboard turned on. Looks like everything is great except the fact that reassembling everything will be a pain.
TRENDING THREADS
-
-
Question Can´t open BIOS because no keyboard input is received.
- Started by Blatscher
- Replies: 11
-
-
-
News US sanctions transform China into legacy chip production juggernaut — production jumped 40% in Q1 2024- Started by Admin
- Replies: 35
-
-
Question New pc build r9 7900x3d rtx 4080 super no post only ram rgb turns on- Started by Harvey Durward
- Replies: 4
Facebook
Twitter
Instagram