- Oct 6, 2017
- 5
- 0
- 510
I recently built a pc and upon plugging it in i get a blank screen. it doesn't say no signal it is just a blank screen. But it doesn't happen every time i power on, the farthest i got was a screen with a message that said "insert boot media and press any key to continue" I inserted the usb key with windows on it and hit enter on my keyboard, but it only repeated the message again, and again.
I have gone through everything on the 31 troubleshoot tips post and i am still in the same boat.
I am unable to try different ram/psu/cpu because this was my first ever build. I have tried removing all drives and graphics card and running on 1 stick of ram and nothing has happened.
My motherboard also has EZ Debug LED's on the board and the only one that has ever come on has been the GPU light.
Here are my specs:
CPU: Intel Core i3-6100
Mobo: MSI H270I Pro Gaming AC
RAM: ADATA Premier 2x4gb ad4u2400w4g17-b
GPU: Gigabyte Ge-Force GTX 1050Ti
Storage: Seagate Constellation ES 2TB HDD and Mushkin Triactor 120gb SSD
Case: Cooler Master Elite 110
PSU: Corsair VX450 80+ Certified
Please Help!
I have gone through everything on the 31 troubleshoot tips post and i am still in the same boat.
I am unable to try different ram/psu/cpu because this was my first ever build. I have tried removing all drives and graphics card and running on 1 stick of ram and nothing has happened.
My motherboard also has EZ Debug LED's on the board and the only one that has ever come on has been the GPU light.
Here are my specs:
CPU: Intel Core i3-6100
Mobo: MSI H270I Pro Gaming AC
RAM: ADATA Premier 2x4gb ad4u2400w4g17-b
GPU: Gigabyte Ge-Force GTX 1050Ti
Storage: Seagate Constellation ES 2TB HDD and Mushkin Triactor 120gb SSD
Case: Cooler Master Elite 110
PSU: Corsair VX450 80+ Certified
Please Help!
Facebook
Twitter
Instagram