Steam, Win 10, D/L speed never exceeds 1/10th my regular D/L rate, tapers off to 0 b/s

GeekoSuave

Honorable
Nov 8, 2013
49
0
10,540
This problem is driving me nuts and I've tried everything I can. I'm going to try to include everything wrong and everything I've tried in my first spin at this but I may miss something.

First, the problem. I have 100Mbit internet, and Steam's current peak D/L speed is 1.2 MB/s. I do understand that there's a difference between MB and Mb, so in actuality my D/L speed is 10 Mb/s, and essentially 1/10th my D/L speed. This speed lasts for, at most, a second or two, but I think I'm getting ahead of myself there.

w0aVHyh.png


What happens is I'll begin to download a game, and it'll begin at its peak speed, and taper off relatively gradually to 0b/s, about 2 minutes or so is what it takes, never gaining speed usually, just fading out. Every now and then it'll hit a new peak after it's been "downloading" at 0b/s, and start over.

Every now and then it won't hit 0 and it'll start over multiple times, doing the same thing but never quite making it to 0. That's the example I've shown in yellow on the above image.


The attempts I've made to solve this:

Every thing on this list besides moving the game folder to a different hard drive. Foremost because I don't have a second hard drive that has the performance nor space needed to use it. Now that I think of it, I'll do a read/write test with some software and post results in a later reply. Also, just to hit on it because I think it's important, I've tried switching the download server quite a few times, all to different servers. Once it worked for about 10 minutes at full speed, but I'd done almost everything on that list at that time, so it really could have been anything.

I also tried stopping a service called DiagTrack as mentioned in this video. It seems to work for a lot of people judging by the ratings on the video itself so I'm almost at a standstill here.

Thanks in advance for any help.

Edit:

I don't know much about disk read/write speeds. I tested it with this software I've had on my PC forever from some old drive testing.
BY6RmjT.png


Here's the drive in question, just to see if the test speeds and the drive's capabilities match up.
 
Solution
I reset my modem to factory defaults, and unplugged it for a minute after, and also restarted the computer at the same time.
Also, before I restarted, put these in the command prompt after running it as an administrator:
netsh winsock reset catalog
netsh int ipv4 reset reset.log
netsh int ipv6 reset reset.log

It seems to work now, but I'm not sure which part of it worked.

GeekoSuave

Honorable
Nov 8, 2013
49
0
10,540
I reset my modem to factory defaults, and unplugged it for a minute after, and also restarted the computer at the same time.
Also, before I restarted, put these in the command prompt after running it as an administrator:
netsh winsock reset catalog
netsh int ipv4 reset reset.log
netsh int ipv6 reset reset.log

It seems to work now, but I'm not sure which part of it worked.
 
Solution