My windows 7 gets jammed or frozen...

aizou77seven

Prominent
Sep 25, 2017
30
0
530
Hello, everyone!!! I need your help and your suggestion...
Whenever I start my computer and use my windows 7's password (Log in) after half an hour or less than 30 minutes, my system jams/ freezes even I can see the cursor (looks like screen capture... I used control + Alt and Delete but it doesn't work then I press CPU's reset button on the case... Sometimes, windows 7 ultimate 64 bit gives me option to repair and I did that too but it doesn't work... It showed me "Kernel's issue to solve" I did that too, even I updated windows, I scanned drive C including Boot scanned too through Avast Antivirus and also I removed them (viruses) from Virus chest... I unplugged the RAM and plugged them back including VGA card but I still face this frozen problem… By the way, here is no blue screen or windows problem.
My motherboard Intel inside DH61WW (BEH6110) built-in LAN stopped working because this computer didn't turn on so I took it to repair shop the guy checked everything after he found out that built-in LAN was faulty and this motherboard's got issue, he fixed the motherboard and disconnected disabled the some parts on motherboard and then I purchased LAN card according to this mother so he plugged it… I faced that problem in 2015. In this year, Built in sound card is not working properly… Sound like woofing and breaking voice or you can say distortion. I took my wife’s Lambda Lexicon interface (USB).
My computer got jammed and restarted itself then it happened again. I opened the case and found out that my computer’s processor’s fan stopped working (so I unplugged the fan with heat-sinker and Processor) and I cleaned my pc through air blower. Thank God, that processor was safe. I bought new fan with heat-sinker according to old one and I plugged it, it still works fine and spinning well. But Windows 7’s jam thing starting more slowly, like 4 or 5 times a month. I started to end Window’s explorer task and click new task. I thought that it could be windows problem and I reinstalled Windows 7 Ultimate 64 bit. More than 8 months ago, this system started slower like slow motion where should I closed the folder or program and tried to click end task on window explorer than I could use New Task for window explorer on End Task Dialog box. I doubted that something wrong with processor or RAM, so we went to Fry’s and I told one of the employee about processor’s fan problem I discussed with him that if processor has problem or burnt may be the computer won’t work or boot up or something. May be or may be not RAMs had issued they were 8GB RAM DDR3 {4GB (1333 or 1300 MHz) each} we purchased 16GB DDR3 (two 8GB RAMs). Before going to Fry, I wrote down on notebook about DH61WW motherboard and I took pictures from BIOS’s information, DXDIAG’s information, etc. etc.
Two or three weeks ago, I was facing freezing or jamming problem like a window’s screen during working or watching the movie or leaving the system for rendering. Computer gets jammed. I checked the pc again and found out that my VGA card’s fan stopped working, it was NVIDIA GeForce GT610. I read the articles about new VGA card compatible with this motherboard and I searched through this site… I joined this site (Tom’s hardware)… I ordered MSI GeForce GTX 1050 Ti 4GT OC Graphic Card 4GB (128 bit) and I installed. It is working well, thank God!!!
But I am facing same problem more, getting worse… Like I said, whenever I start my computer and use my windows 7's password (Log in) after half an hour or less than 30 minutes, my system jams/ freezes even I can see the cursor. I am also pasting the link about my previous threat… You can read there too…
http://www.tomshardware.com/answers/id-3531322/sata-hdd-cable-splitter.html

Here is information about my system in detail including BIOS version.
Motherboard: Intel Desktop Board; Intel inside DH61WW (BEH6110)
BIOS version: BEH6110H… AAG23116-301
UUID: 0B450DEC-11D6-E111-94FC-38607704F3BF
Serial Number: BTWW2300087V
Processor: Intel ® Core (™) i3 -2120 CPU @ 3.30 GHz
RAM: 16 GB DDR3 (1300 MHz or 1333 MHz)
VGA Card: MSI GeForce GTX 1050 Ti 4GT OC Graphic Card 4GB (128 bit)
Hard Drives: 3
Power Supply: 700W
Operating System: Windows 7 Ultimate 64 bit
DVD/CD Optical Drive: Samsung Super Write Master (I unplugged SATA cable on SATA port 00 because of new VGA card)
Board Form Factor: Micro ATX or ATX (I don’t know what it means)
I explained everything which I am facing and I need your advice, I want to use same processor, VGA card, 16 GB RAM DDR and hard drives, I just want to change CPU case and this motherboard… Better than DH61WW (BEH6110) later (around about 2014 or 2015 model) I don’t want to use windows 8, 9 and 10… only windows 7 and I don’t want to buy another DH61WW (BEH6110) I just want to replace the motherboard and I can upgrade processor i7 later… Those RAMs and VGA card should be compatible with new motherboard: I mean compatible motherboard
Any idea?
Hoping for a positive and a swift response,

Best regards,
Aized Jamal

 

aizou77seven

Prominent
Sep 25, 2017
30
0
530
Mr. Calvin7, Thank you for quick response...
I am using same memory modules (Same brand and I bought them at the same time at Fry's and I mentioned about my mother's serial number and model number to the guy who works in Fry's)... I said that 8G X 2 are same module (I don't know which one is MHz 1300 or 1333)...
I know if we use different branded and different MHz RAM, both of them won't work well and properly...
I want to know which motherboard is better than DH61WW (BEH6110) and I can use my old processor (after that I can upgrade processor later such as i7.) I need ATX motherboard not Micro or small motherboard as well as Case ATX... That new and future motherboard whichever you have idea should have one ATAPI for DVD Writer and I can add another new hard drive as 4... I am looking for 10000 Buffer speed or 15000 Buffer speed... More than 4 or 5 TB...
I work 3d Max and After Effects...
Please, kindly I need your advise which motherboard I can buy and I can plug my same VGA card (MSI GeForce GTX 1050 Ti 4GT OC Graphic Card 4GB (128 bit) and RAM including my 3 old hard drives... I unplugged SATA 00 because of DH61WW's design or architect because VGA card is big for this motherboard...
Hoping for a positive and a swift response,
Thank you
Best regards,
Aized Jamal