In need of help! This is my first PC build, so bear with me please. First, here are my specs:
ASUS ROG STRIX B350F motherboard
Ryzen 5 1400 cpu
crucial ballistix 1x8GB
gt 610 GPU (not a gamer)
NZXT S340 case
The case, MOBO, CPU, and memory are all brand new. The hard drive and GPU are from a previous fx8320 build that died, but I don't think they were the issue (I think it was the motherboard).
I have everything assembled (correctly, I believe) and when I flip on the PSU, the mobo LEDs turn on, along with a random little orange LED on the bottom right corner of the board (don't know what that's for). When I hit the power button on the case, nothing happens, no fans, nothing. For some reason, I can't get the front case panel LEDs to turn on at all(power button, HDD led, etc). I followed my MOBO manual and have them hooked up properly, along with the USB 3.0 connector. I've gone through the long troubleshooting checklist on Toms hardware and everything checks out.
The only thing I can possibly think of is when I mounted the MOBO, i used mismatched screws to attach the board to the standoffs. I don't believe my board came with any. Also, does it matter which slot I have the GPU installed in? I'm desperate to get this thing running, as it's going to be my school computer in a couple weeks.
ASUS ROG STRIX B350F motherboard
Ryzen 5 1400 cpu
crucial ballistix 1x8GB
gt 610 GPU (not a gamer)
NZXT S340 case
The case, MOBO, CPU, and memory are all brand new. The hard drive and GPU are from a previous fx8320 build that died, but I don't think they were the issue (I think it was the motherboard).
I have everything assembled (correctly, I believe) and when I flip on the PSU, the mobo LEDs turn on, along with a random little orange LED on the bottom right corner of the board (don't know what that's for). When I hit the power button on the case, nothing happens, no fans, nothing. For some reason, I can't get the front case panel LEDs to turn on at all(power button, HDD led, etc). I followed my MOBO manual and have them hooked up properly, along with the USB 3.0 connector. I've gone through the long troubleshooting checklist on Toms hardware and everything checks out.
The only thing I can possibly think of is when I mounted the MOBO, i used mismatched screws to attach the board to the standoffs. I don't believe my board came with any. Also, does it matter which slot I have the GPU installed in? I'm desperate to get this thing running, as it's going to be my school computer in a couple weeks.