So i have a TRIPLE CHANNEL set up for my RAM with 6 slots total. All are used and i currently have 12GB of RAM, 3x2 and 3x2 again. My RAM was at 550MHz but i bumped it on BIOS to get to 795MHz where it is currently.
Patriot PVT33G1600ELK Extreme Performance Viper Series PC3-12800 DDR3 1600 3GB 3 x 1GB Intel XMP Ready CL 9 Non ECC Triple Channel Kit (Blue) Is my RAM and here is the link for more details. https://www.amazon.com/Patriot-PVT33G1600ELK-Extreme-Performance-PC3-12800/dp/B001JQLHOM/ref=sr_1_4?s=electronics&ie=UTF8&qid=1507966743&sr=1-4&keywords=ddr3+triple+channel+patriot+viper
I Guess what I'm asking is, should i bump up the voltage too? If so what to? Its at 1.65v which I assume most triple channel will be, I could be wrong. Can I also change the timings? I just don't want to be using more power than i need nor damage my equipment. THANKS!
Patriot PVT33G1600ELK Extreme Performance Viper Series PC3-12800 DDR3 1600 3GB 3 x 1GB Intel XMP Ready CL 9 Non ECC Triple Channel Kit (Blue) Is my RAM and here is the link for more details. https://www.amazon.com/Patriot-PVT33G1600ELK-Extreme-Performance-PC3-12800/dp/B001JQLHOM/ref=sr_1_4?s=electronics&ie=UTF8&qid=1507966743&sr=1-4&keywords=ddr3+triple+channel+patriot+viper
I Guess what I'm asking is, should i bump up the voltage too? If so what to? Its at 1.65v which I assume most triple channel will be, I could be wrong. Can I also change the timings? I just don't want to be using more power than i need nor damage my equipment. THANKS!