Is my SSD donezo?

trev19

Commendable
Nov 6, 2016
13
0
1,510
I've had a samsung 850 evo 500GB drive for about 3 or 4 years. Yesterday I was copying a file to another folder and the computer froze. I had to hold the power button to turn it off. On reboot, the computer tried to POST for a lot longer than usual, but was successful. (The POST time is normal without the SSD installed). After the POST I came to a screen with a blinking cursor, like a command line, and nothing happened. I tried using the windows disk to repair the drive, but it was not recognized. So, I've installed windows on an HDD. In the disk management window the SSD says it needs to be initialized, but everytime I try to initialized it, I receive and error message. I've tried the easeus data recovery software, but the drive still is not recognized. Does it sound like this drive is dead? Any feedback would be appreciated.

Thank You.
 
Solution
If the SSD shows up in the BIOS then it's likely that the drive can be salvaged. Check to see if it shows up in the BIOS and then try to boot into safe mode and see if it shows up in disk manager, etc there. If it's recognized in safe mode then it's pretty likely that its some kind of driver issue and not that the SSD is dead. If it doesn't show up in the BIOS or safe mode, then it's pretty likely that the drive is dead.

JalYt_Justin

Reputable
Jun 12, 2017
1,164
0
5,960
If the SSD shows up in the BIOS then it's likely that the drive can be salvaged. Check to see if it shows up in the BIOS and then try to boot into safe mode and see if it shows up in disk manager, etc there. If it's recognized in safe mode then it's pretty likely that its some kind of driver issue and not that the SSD is dead. If it doesn't show up in the BIOS or safe mode, then it's pretty likely that the drive is dead.
 
Solution

trev19

Commendable
Nov 6, 2016
13
0
1,510
Sorry for the late response, I'm thinking the drive may be dead. I don't see it in the bios, but I do see it in the disk management utility. Windows won't allow me to initialize the disk. I've tried using a live linux distro to wipe the drive clean, but it won't show up in linux either unfortunately. Maybe I'll just buy myself a fresh new m.2 drive. Thanks for your input.