I want to upgrade the RAM in a Foxconn 2ACA, I have 2x 4gb PC3-12800 1600mhz DDR3 DIMM.
If I install both sticks the PC powers with no beeps but has no signal to monitor and no keyboard/mouse.
When I have just 1 stick installed "tried both slots and using both sticks of RAM" I get 5 beeps all the same length and nothing happens. I cant work out what is wrong.
BISO VERSION 7.7
Tried resetting CMOS
Windows 7 Ultimate 64bit
NOTE: I see here http://www.findlaptopdriver.com/foxconn-2aca-specs/
2 x 240-pin DDR3 DIMM slots Supports Dual Channel DDR3 1333/1066 MHz non-ECC, un-buffered memory. (16GB Max)
(Max of 8GB per slot)
Hoping the mobo would of recognised and just restricted my RAM
If I install both sticks the PC powers with no beeps but has no signal to monitor and no keyboard/mouse.
When I have just 1 stick installed "tried both slots and using both sticks of RAM" I get 5 beeps all the same length and nothing happens. I cant work out what is wrong.
BISO VERSION 7.7
Tried resetting CMOS
Windows 7 Ultimate 64bit
NOTE: I see here http://www.findlaptopdriver.com/foxconn-2aca-specs/
2 x 240-pin DDR3 DIMM slots Supports Dual Channel DDR3 1333/1066 MHz non-ECC, un-buffered memory. (16GB Max)
(Max of 8GB per slot)
Hoping the mobo would of recognised and just restricted my RAM