Having a problem seting up Vengeance Pro 2x 8GB @1866MHz

fireramyt · Oct 18, 2017

Hi there i was wondering if somone could help me out i have just upgraded my ram on my Gaming Rig i am running 2x 8GB Vengance Pro at 1866MHz but in my bios its only reading 1333MHz but dont know why.

Motherboard GA-F2A68HM-HD2
With a A8 6600K APU

Any help would be much appreciated

Calvin7 · Oct 19, 2017

Vengeance® Pro Series — 16GB (2 x 8GB) DDR3 DRAM 1866MHz C9 Memory Kit (CMY16GX3M2A1866C9)
http://www.corsair.com/en-us/vengeance-pro-series-16gb-2-x-8gb-ddr3-dram-1866mhz-c9-memory-kit-cmy16gx3m2a1866c9

SPD Latency 9-9-9-24
SPD Speed 1333MHz
SPD Voltage 1.5V

Speed Rating PC3-15000 (1866MHz)
Tested Latency 9-10-9-27
Tested Speed 1866MHz
Tested Voltage 1.5V

Memory runs at SPD (Serial Presence Detect) if memory BIOS settings are left on [Auto].

That motherboard supports XMP. (see page 20 of motherboard manual)

Extreme Memory Profile (X.M.P.)
Allows the BIOS to read the SPD data on XMP memory module(s) to enhance memory performance when enabled. By default it is [Disabled]. You need to enable that to set your memory parameters.

fireramyt · Oct 19, 2017

Calvin7 :

I believe it dose have XMP so of i swich this on in the bios and select profile 1 it will work without having to setup timings ect ect

Calvin7 · Oct 19, 2017

That's right.

fireramyt · Oct 19, 2017

Thanks for all the advice Calvin7 you have got me out a spot this is firts buld i have with duel bios setup

Search

Having a problem seting up Vengeance Pro 2x 8GB @1866MHz

fireramyt

Prominent

Calvin7

Calvin7

Titan

fireramyt

Prominent

Calvin7

Titan

fireramyt

Prominent

TRENDING THREADS

Latest posts

Moderators online

Share this page