Computer kind of on (not working)

carlos.a.barrales

Prominent
Oct 23, 2017
2
0
510
So I am building a computer for a friend and have everything connected properly (at least I beileive I do) but when I plug the power supply in the computer does different things, here is a list of symptoms:
- All the lights that are meant to be turned on are turned on, this includes the graphics card lights, the case l.e.d’s and the fan lights
- all the fans are spinning properly and glowing
-the power button, along with the usb’s (Basically everything in the front panel) are not working
-when I turn on the power supply all of the above happen simultaneously
THINGS I HAVE TRIED:
•Trying a different graphics card
•Trying different cables (hdmi, vga, etc.)
•switching ram placements
Thanks for your patience, I’m new here and on mobile so sorry for the bad formatting
 
Solution
on the front pannel inside most cases the usb 3.0x and case cable wires will be wrapped together. make sure the usb 3.0 cable (blue) plugged into the right keyed port. the led of the case have a (+) (-) side make sure plus to plus neg to neg on those wires. power on and reset make sure there on the right pins.
on the front pannel inside most cases the usb 3.0x and case cable wires will be wrapped together. make sure the usb 3.0 cable (blue) plugged into the right keyed port. the led of the case have a (+) (-) side make sure plus to plus neg to neg on those wires. power on and reset make sure there on the right pins.
 
Solution