I've just completed building this pc :
I5-7600k
Msi z270 krait
Kinston 1x8gb ddr4 2400mhz
Gigabyte windforce gtx 1060 6gb
Corsair h60
Corsair cx550m
Seagate baracuda 1TO
Zalman z3 plus
When i powered it for the first time everything seemed to work inside the case, but the display doesn't show me that quick bios and setup image and it gives me a text after some seconds saying "the ME FW of system was found abnormal, it is recomended to re-flash system bios by M-flash to ensure normal systeme operation" then it skips this after several seconds and show "no boot device detected" or something like this which is normal since the hdd is still blank and i was just testing
After looking in the manual, i realized i shoud press del key when boot screen appears, while it doen't appear i was abble to access the bios simply by pressing the del key after restarting the pc, and everything seems ok in the bios (date, temps, memory, cpu, pump, fan ...)
What still worries me is that "bios re-flash" message and the first boot image not appearing, it stays black until the message appears everything is brand new and compatible, i don't know the cause of this problem, should i just install windows and ignore the message or should i follow instructions and re-flash the BIOS, i've never done something like this and don't know if it is easy or if things might go wrong
What might be the cause and what's the best solution possible ?
I5-7600k
Msi z270 krait
Kinston 1x8gb ddr4 2400mhz
Gigabyte windforce gtx 1060 6gb
Corsair h60
Corsair cx550m
Seagate baracuda 1TO
Zalman z3 plus
When i powered it for the first time everything seemed to work inside the case, but the display doesn't show me that quick bios and setup image and it gives me a text after some seconds saying "the ME FW of system was found abnormal, it is recomended to re-flash system bios by M-flash to ensure normal systeme operation" then it skips this after several seconds and show "no boot device detected" or something like this which is normal since the hdd is still blank and i was just testing
After looking in the manual, i realized i shoud press del key when boot screen appears, while it doen't appear i was abble to access the bios simply by pressing the del key after restarting the pc, and everything seems ok in the bios (date, temps, memory, cpu, pump, fan ...)
What still worries me is that "bios re-flash" message and the first boot image not appearing, it stays black until the message appears everything is brand new and compatible, i don't know the cause of this problem, should i just install windows and ignore the message or should i follow instructions and re-flash the BIOS, i've never done something like this and don't know if it is easy or if things might go wrong
What might be the cause and what's the best solution possible ?
Facebook
Twitter
Instagram