- Jan 4, 2017
- 25
- 0
- 10,530
Hello. I installed new GPU in my PC and I noticed, that in MSI afterburner with full load (I use Furmark for testing) memory graph shows only 5400 MHz instead of 10.8 GHz from tech specs . Is it OK? How it works, so there is only half of memory frequency?
And the second question is about manual settings. I think, that default frequencies from the box is enough for me, I dont want to overclock GPU. But what about GPU voltage and other parametrs? Because for CPU, for example, it is needed to set CPU voltage manually even you arent going to increase CPU frecuency, because Autovoltage from motherboard usually is too high. And it is better to reduce CPU voltage anyway. What about GPU? Should I set something manually? (Except for fan curve for GPU, I already set it manually) Or you strongly recommend don't touch anything because all already set to ideal values?
Sorry for my English.
And the second question is about manual settings. I think, that default frequencies from the box is enough for me, I dont want to overclock GPU. But what about GPU voltage and other parametrs? Because for CPU, for example, it is needed to set CPU voltage manually even you arent going to increase CPU frecuency, because Autovoltage from motherboard usually is too high. And it is better to reduce CPU voltage anyway. What about GPU? Should I set something manually? (Except for fan curve for GPU, I already set it manually) Or you strongly recommend don't touch anything because all already set to ideal values?
Sorry for my English.
Facebook
Twitter
Instagram