- Nov 8, 2017
- 2
- 0
- 510
None of my drives are detected. I moved my system to a new case and in cleaning my power supply i got some moisture in there unbeknownst to me, and broke it. the first time I booted it up everything was connected (including my drives).It didn't work. I did some googling and figured out the power supply may be busted, i replace it, and the system boots, great. But then the BIOS gives me the message "No Boot Device detected" Now here's my suspicion, my guess is when I first booted up the system with the faulty power supply and it didn't work, somehow my drives got fried. So i borrowed a friends drive, connected it, and it booted up and got me into windows. At this point I think, my drives are broken and I get new ones. SO, here's where it gets interesting: The New Drives didn't work either, confused, I tried my friend's drive again and that didn't work. I have no idea whats going on. I have a new power supply, new drives, those should be good. Are somehow the sata ports on my motherboard dead? I don't know. Anything helps. Any assistance would be greatly appreciated.
Gigabyte B75M-D3H
The old drives that I suspect got fried: 850EVO 250GB, and a Seagate 1TB 7200rpm
New drives: PNY CS900, 240GB and a WD blue 1TB 7200rpm
Old powersupply: CS650M
New Powersupply: EVGA 850BQ
Gigabyte B75M-D3H
The old drives that I suspect got fried: 850EVO 250GB, and a Seagate 1TB 7200rpm
New drives: PNY CS900, 240GB and a WD blue 1TB 7200rpm
Old powersupply: CS650M
New Powersupply: EVGA 850BQ
Facebook
Twitter
Instagram