I bought a new GPU and I keep getting the same error message

Toggle sidebar Toggle sidebar
L

lewlewgames

Prominent
Nov 11, 2017
2
0
510
I just bought a ASUS 1050ti and I tried putting it in, fitted fine but I got an error message saying "Your PC/Device needs to br repaired" "The Boot Configuration Data for your PC is missing or contains errors" with the error code "0xc0000001", my specs are 8gb RAM, CPU is Phenom X4 810 II 2.6ghz and my old GPU was a 650ti BOOST and I tried putting it back in but it still came up with the same error message. I'm not sure on my PSU but I THINK its a 700 watt.
 
Solution
hellraiser06
During the installation of the graphics card, it is possible that you have by mistake touched the SATA cables and they have unseated. Or the power cables going to the hard drives. Has happened to me also more than once. Just check each SATA connection on the motherboard and the hard drives, and the power connections to the hard drives. Ensure that the cables to storage devices are fixed properly.
Sort by date Sort by votes
rocktalkrock

rocktalkrock

Judicious
Jul 4, 2017
6,077
280
36,640

If you can get into the BIOS, check your boot drive order. It's sounds like your drive with Windows installed on it is not the 1st drive in the boot order, therefore "The Boot Configuration Data for your PC is missing", as in "it's not where it should be".

 
Upvote 0 Downvote
hellraiser06

hellraiser06

Distinguished
Aug 11, 2006
709
0
19,360
During the installation of the graphics card, it is possible that you have by mistake touched the SATA cables and they have unseated. Or the power cables going to the hard drives. Has happened to me also more than once. Just check each SATA connection on the motherboard and the hard drives, and the power connections to the hard drives. Ensure that the cables to storage devices are fixed properly.
 
Upvote 0 Downvote
Solution
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom