HELP!! I do not know what exactly happened.

Toggle sidebar Toggle sidebar
H

hellnewby

Reputable
Jul 15, 2015
22
0
4,510
The problem got worsened with me trying to fix BSOD(0x000021a). I tried to fix it with the command prompt but no luck and after that i searched other possibilities, like maybe it was the ram and after i pulled the ram put it back one by one, after that my monitor did not show any display, so again i searched and i read somewhere here in tomshardware that i should try to use the inboard graphic card of Motherboard instead of my gtx 970 so i tried that and nothing changed and i tried to put the ram on other slots one by one no luck and it said that i should press the keyboard and see if there is gonna be a response like the capslock key it should blink but no response so it means the PC did not boot but the other components sounds fine.

Please help, enlighten me and should i go to com shop now?

Sorry for my bad english.

Specs:

mobo: h87m e
gpu: gtx 970
processor: intel i5 4570 3.2ghz
ram: kingston ddr3 12gb 1600mhz
 
Sort by date Sort by votes
H

hellnewby

Reputable
Jul 15, 2015
22
0
4,510

Yes it was off,unplugged and there is a green light indicator in my mobo if it is discharged and my system is like 2-3 years old so theres that.
 
Upvote 0 Downvote
H

hellnewby

Reputable
Jul 15, 2015
22
0
4,510


My problem now is that there is no display on my screen now after i pulled the ram and put it back to try if the ram was the problem and i tried it one by one each slots but there still no display and no responds in my keyboard like the lights on capslock.

I don't have any usb or disk for that, my IT guy fix it for me last year the problem was the same(0xc000021a) and fixed it by format and bought new fair of ram that on my system now.

I followed this guide https://www.youtube.com/watch?v=9kDVpmVRpy4 and things just go smoothly like the scan and check disk but when it's time to restart the PC the error still persist.

I don't know exactly what you mean. But i pulled the DVI from my gtx 970 and put it on the GPU that it's on MOBO.
 
Upvote 0 Downvote
H

hellnewby

Reputable
Jul 15, 2015
22
0
4,510


I don't know what you mean by battery and jumper, but i know that i pulled the ram and tried each slots and pulled the DVI from gtx 970 and put in on GPU that it's in MOBO i don't know exactly the right word if it's inboard, all i know that GPU is with the MOBO.
 
Upvote 0 Downvote
H

hellnewby

Reputable
Jul 15, 2015
22
0
4,510


Ok sorry i gave up so easily because it's a very new thing for me, but i looked at the manual and found the jumper. i followed the insttructions to put it on 2-3 pin and wait for 5-10 seconds then put it back on 1-2 pins and i booted the computer it is same there is no display and no response to other hardware like keyboard.

 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom