CPU: AMD - Ryzen 7 1700 3.0GHz 8-Core Processor (Purchased For $0.00)
Motherboard: Asus - STRIX B350-F GAMING ATX AM4 Motherboard (Purchased For $0.00)
Memory: Corsair - Vengeance LPX 16GB (2 x 8GB) DDR4-3000 Memory (Purchased For $0.00)
Storage: Samsung - 850 EVO-Series 250GB 2.5" Solid State Drive (Purchased For $0.00)
Storage: Western Digital - Caviar Blue 1TB 3.5" 7200RPM Internal Hard Drive ($0.00)
Video Card: Gigabyte - GeForce GTX 1060 6GB 6GB G1 Gaming Video Card (Purchased For $0.00)
Case: Phanteks - ECLIPSE P400S TEMPERED GLASS ATX Mid Tower Case (Purchased For $0.00)
Power Supply: SeaSonic - FOCUS Plus Gold 550W 80+ Gold Certified Fully-Modular ATX Power Supply (Purchased For $0.00)
Operating System: Microsoft - Windows 10 Home OEM 64-bit (Purchased For $0.00)
I tried looking for some answers, and I found some similar stuff, but nothing that really helped me
I recently built my first computer. It works completely fine, while using it. I've used it for audio editing. Played Assassin's Creed on it for hours (even while slightly over clocked), ran cinebench multiple times, did some prime 95 testing, and never had any stability issues, but for some reason, every time I run OCCT my gpu malfunctions within a minute and I get a DRAM light flashing on my mobo.
Sometimes it completely turns off my GPU, but sometimes I just lose display and the GPU flashes on and off. Sometimes the diagnostic RAM light doesn't come on.
All the other components seem to continue functioning properly.
At first I thought it was the ram, but I have it all on stock, and Memtest worked fine even when it was at its advertised 3k D.O.C.P profile.
So then I switched the gpu to the other pcie slot, and OCCT worked without shutting down my gpu. I thought I had figured it out, but I realized that, since I had changed slots, the drivers weren't installed for it. I then installed two nvidia drivers, and with both of them, the same crash happened again.
Is it possible that the driver is causing this? Or is this a power or ram issue?
Motherboard: Asus - STRIX B350-F GAMING ATX AM4 Motherboard (Purchased For $0.00)
Memory: Corsair - Vengeance LPX 16GB (2 x 8GB) DDR4-3000 Memory (Purchased For $0.00)
Storage: Samsung - 850 EVO-Series 250GB 2.5" Solid State Drive (Purchased For $0.00)
Storage: Western Digital - Caviar Blue 1TB 3.5" 7200RPM Internal Hard Drive ($0.00)
Video Card: Gigabyte - GeForce GTX 1060 6GB 6GB G1 Gaming Video Card (Purchased For $0.00)
Case: Phanteks - ECLIPSE P400S TEMPERED GLASS ATX Mid Tower Case (Purchased For $0.00)
Power Supply: SeaSonic - FOCUS Plus Gold 550W 80+ Gold Certified Fully-Modular ATX Power Supply (Purchased For $0.00)
Operating System: Microsoft - Windows 10 Home OEM 64-bit (Purchased For $0.00)
I tried looking for some answers, and I found some similar stuff, but nothing that really helped me
I recently built my first computer. It works completely fine, while using it. I've used it for audio editing. Played Assassin's Creed on it for hours (even while slightly over clocked), ran cinebench multiple times, did some prime 95 testing, and never had any stability issues, but for some reason, every time I run OCCT my gpu malfunctions within a minute and I get a DRAM light flashing on my mobo.
Sometimes it completely turns off my GPU, but sometimes I just lose display and the GPU flashes on and off. Sometimes the diagnostic RAM light doesn't come on.
All the other components seem to continue functioning properly.
At first I thought it was the ram, but I have it all on stock, and Memtest worked fine even when it was at its advertised 3k D.O.C.P profile.
So then I switched the gpu to the other pcie slot, and OCCT worked without shutting down my gpu. I thought I had figured it out, but I realized that, since I had changed slots, the drivers weren't installed for it. I then installed two nvidia drivers, and with both of them, the same crash happened again.
Is it possible that the driver is causing this? Or is this a power or ram issue?