built new system with following specs
asrock z270 extreme 4
i7 7700k ( delidded using rocket tool, applied gelid gc extreme all over)
16gb corsair lpx 2400mhz xmp 2.1
corsair h80i v2
seasonic prime 650w gold
evga gtx 1070 ftw
samsung pm961 nvme 512gb ssd
have several questions
1. Used 4.7 ghz built in BIOS setting for oc, max voltage during full load with prime95 v 26.6 was 1.188 and max temp was 53C, do these look good and can i go any higher?
2. Temp on MB in bios appear to be much lower (4-5C) compared to programs like hwinfo64, havent used realtemp as i didnt dl but had this already d/l'd. is that normal?
3. if i use thermal grizzly conductonaut instead of gelid gc extreme will temps decrease by more than 5-6C at full load?
4. should i stick with corsair h80i v2 or switch to xspc waterloop for better temps?
thank you in advance.
asrock z270 extreme 4
i7 7700k ( delidded using rocket tool, applied gelid gc extreme all over)
16gb corsair lpx 2400mhz xmp 2.1
corsair h80i v2
seasonic prime 650w gold
evga gtx 1070 ftw
samsung pm961 nvme 512gb ssd
have several questions
1. Used 4.7 ghz built in BIOS setting for oc, max voltage during full load with prime95 v 26.6 was 1.188 and max temp was 53C, do these look good and can i go any higher?
2. Temp on MB in bios appear to be much lower (4-5C) compared to programs like hwinfo64, havent used realtemp as i didnt dl but had this already d/l'd. is that normal?
3. if i use thermal grizzly conductonaut instead of gelid gc extreme will temps decrease by more than 5-6C at full load?
4. should i stick with corsair h80i v2 or switch to xspc waterloop for better temps?
thank you in advance.