I am just one more who suffers from the problem of Screen Tearing, but I suffer in a different way.
Thinking about lowering the tearing, I dropped my video card from the x16 slot to the x4 slot, and amazingly, things did worsen.
I would like to know why I am suffering more from this if in slot x4 the "final speed" of the gpu is decreased by almost half.
To idealize, Running on x16 my gpu has a clock of 7.0ghz and I have less screen tearing than running on x4 whose clock is 3.5ghz.
My Setup is
p8z77-V LX
4x8GB DDR3 1600Mhz
Intel Core i7-3770 V8 GTS
Gtx 980 4GB Founders Editition with latest drivers
Windows 10
2x SSD 120GB Kingstone a400 running on Raid 0
Corsair RM1000X
Monitor is a AOC FULL HD 1920x1080 VGA 60Hz
Detail 1:
I'm using an DVI->VGA Adapter to get the image from my GPU, it only has DVI and HDMI output.
I KNOW, I KNOW!
I know that the problem of GLOBAL TEARING is my Monitor 60hz... But i cant buy a new one at this momment, so... i need to fix or (maybe) understand why this happen...
Details 2:
For aesthetic questions and thinking of giving my board slack, i'm using her on x4 slots.
VSYNC is Active.
So, Summing UP, the tearing should not be smaller in x4 than x16 ? if not, Why?
Thinking about lowering the tearing, I dropped my video card from the x16 slot to the x4 slot, and amazingly, things did worsen.
I would like to know why I am suffering more from this if in slot x4 the "final speed" of the gpu is decreased by almost half.
To idealize, Running on x16 my gpu has a clock of 7.0ghz and I have less screen tearing than running on x4 whose clock is 3.5ghz.
My Setup is
p8z77-V LX
4x8GB DDR3 1600Mhz
Intel Core i7-3770 V8 GTS
Gtx 980 4GB Founders Editition with latest drivers
Windows 10
2x SSD 120GB Kingstone a400 running on Raid 0
Corsair RM1000X
Monitor is a AOC FULL HD 1920x1080 VGA 60Hz
Detail 1:
I'm using an DVI->VGA Adapter to get the image from my GPU, it only has DVI and HDMI output.
I KNOW, I KNOW!
I know that the problem of GLOBAL TEARING is my Monitor 60hz... But i cant buy a new one at this momment, so... i need to fix or (maybe) understand why this happen...
Details 2:
For aesthetic questions and thinking of giving my board slack, i'm using her on x4 slots.
VSYNC is Active.
So, Summing UP, the tearing should not be smaller in x4 than x16 ? if not, Why?