Asus Sabertooth 990FX R2.0 with AMD FX8370E@3,80Ghz

Toggle sidebar Toggle sidebar
S

sandmannx

Prominent
Nov 15, 2017
5
0
510
for one time in month I get a blue screen on windows 10 professional 64-bit. The error code is:
faulty_hardware_corrupted_page

My motherboard is asus sabertooth 990fx - bios version 2901
Cpu is - AMD FX8370E
Dram is - GSkill DDR3 - 2400Mhz on reference clock
Graphics Card is - KFA2 Geforce GTX 680 2GB Videoram

the drivers are up to date.

I`ve overclocked the cpu a bit. reference clock is 3,30Ghz.
My clock is 3,80Ghz base all time, no turbo clock.

cpu load line calibration is on - extreme
cpu/nb load line calibration is on - extreme
cpu current capability is on - 130%
cpu/nb current capability is on - 130%
cpu voltage frequency is - auto
spread spectrum is off
cpu power phase control is - extreme
cpu power response control is - ultra fast
cpu/nb power response control is - ultra fast
cpu power thermal control is - 130 degree celsius
cpu power duty control is - T.Probe Thermal
cpu power voltage is pending between 1,176 and 1,188 volts


dram current capability is - 130%
dram voltage frequency is - 300khz
dram power phase control is - extreme

dram cas latency is - 10
dram ras to cas is - 12
dram ras to precharge is - 12
dram tras is - 31
dram trc is 43
on 1,650 volt

Thanks for helping !!! :)

one blue screen a month, cpu heat is under 60 degree celsius.





 
Sort by date Sort by votes
S

sandmannx

Prominent
Nov 15, 2017
5
0
510
Okay,

but I want this clock. It must be a parameter in bios. I dont know which one. When I push the voltage of cpu manually - the heat of cpu is to high- my set is auto. on auto its more stable.

finally I bought this cpu, cause on 3,80ghz it is max on 90 watts TDP, and 3,80ghz is efficient. just read the article here on tomshardware when tomshardware overclock the 8370E to 4,5ghz.

They wrote, that until point of 3,80ghz its efficient, but not higher.

I need this clock on a stable configuration.

cpu cooler is ekl alpenföhn broken 2 pcgh edition.

thanks
 
Upvote 0 Downvote
rocktalkrock

rocktalkrock

Judicious
Jul 4, 2017
6,077
280
36,640
I wasn't suggesting you stop overclocking, just stop for a couple of months as a test.

Is your SABERTOOTH 990FX motherboard the original version or the 2nd revision "SABERTOOTH 990FX R2.0". The second revision added "New DIGI+ Power Control - All-New Digital Power Control for both CPU and DRAM". This could make a difference how well it over-clocks. That's why Asus added it.
 
Upvote 0 Downvote
S

sandmannx

Prominent
Nov 15, 2017
5
0
510
Okay rocktalkrock,

your suggestion is good. but I dont like to clock down to reference clock. Its obvious that 3,3ghz runs stable. I simple try to manage something in direction of dram. should I take the voltage of dram higher. the dram is specivied for 2400mhz and I run it on this frequency. I think the voltage of 1,650 is okay for this. but I try to drop the cas lateny by one count. I`ll make it to 11, and wait and see...The discussion of this - makes me thinking more clear about this situation - thank you...
 
Upvote 0 Downvote
rocktalkrock

rocktalkrock

Judicious
Jul 4, 2017
6,077
280
36,640

I've never tried to overclock ram so i'm not sure how best to do that. There must be many tutorials on YouTube, so try looking there.
 
Upvote 0 Downvote
S

sandmannx

Prominent
Nov 15, 2017
5
0
510
the ram runs on spec - 2400mhz,- dont want to overclock. what I do is: currently the cas latency is on 10, now I turn it to 11 in hope to get the system stable, perhaps it is that - what its make it ^^
 
Upvote 0 Downvote
rocktalkrock

rocktalkrock

Judicious
Jul 4, 2017
6,077
280
36,640

G.SKILL has many different series of DDR3 2400mhz ram [Ripjaws X, Ripjaws Z, Sniper, Trident] which is yours. Follow the exact specifications they recommend.
 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom