CPU and DRAM leds on ez debug are light after bios update and i have no post

crashingpotato · Nov 17, 2017

I updated my bios on my msi B350M gaming pro. When i was uodating the bios it finished to 100% and then reboted but i got no post and my monitor has no signaL I only noticed that my leds on ezdebug for cpu and dram are light. I tried cmos reset and tok the bateri out and put it back in nothing hapend. Does that mean i broke my mobo ore my cpu and ram.

I have:
ryzen 5 1500x
balistix 2400hz 2x4gb
evga 600w
gtx 1050ti
msi B350M gaming pro 2.3 was the original bios version i think.Im thinking on buying a new mobo but i dont know if i broke my ram and cpu when update was finished.

please help.

rocktalkrock · Nov 17, 2017

If the BIOS update reached 100% and rebooted on it's own, the BIOS update was successful. There must be some other problem.

crashingpotato · Nov 18, 2017

what could it be i tried without ram then with one stick and then the other stick i stil dont get any signal on the screen everithing turns on

rocktalkrock · Nov 18, 2017

crashingpotato :

Are you quite sure the ram is pushed all the way into the socket? Look very close.

crashingpotato · Nov 18, 2017

Yes im sure evrething run before i updated my bios

rocktalkrock · Nov 18, 2017

crashingpotato :

Have you tried clearing the CMOS?

crashingpotato · Nov 18, 2017

yes and i removed the batery leftit out over the night and put it back in and i stil have the same problem

rocktalkrock · Nov 18, 2017

It's not clear to me what the problem may be, but i still don't think it was the BIOS update. You should try contacting MSI Technical Support on their website and describe your problem to them. They should be able to help you get the motherboard working or RMA your board.

crashingpotato · Nov 18, 2017

i wil buy a new one and send this one to them to fix it and i will sel the board.

crashingpotato · Nov 18, 2017

its strange that a bios update went to 100% and then corupted ore somthing. So my cpu and ram are not detected ore i destroied the cpu and ram thats what i want to test if they both work.

rocktalkrock · Nov 18, 2017

crashingpotato :

I don't see any way your CPU and ram could have been "destroyed" by updating the BIOS, even if the update did fail.

crashingpotato · Nov 18, 2017

its strange that they are not geting detected i first thot i broke the ram and cpu but everithing was working before. I wil se if it wil work when i get the new mobo i hope.

crashingpotato · Nov 18, 2017

i will tel you if it works when i get the new mobo. Thanks for your help.

Search

CPU and DRAM leds on ez debug are light after bios update and i have no post

crashingpotato

Prominent

rocktalkrock

rocktalkrock

Judicious

crashingpotato

Prominent

rocktalkrock

Judicious

crashingpotato

Prominent

rocktalkrock

Judicious

crashingpotato

Prominent

rocktalkrock

Judicious

crashingpotato

Prominent

crashingpotato

Prominent

rocktalkrock

Judicious

crashingpotato

Prominent

crashingpotato

Prominent

TRENDING THREADS

Latest posts

Moderators online

Share this page