Hwmonitor Voltage readings

Toggle sidebar Toggle sidebar
Solution
D


Those disconnected sense lines can read random values that change from power-off boot to power-off boot. Try shutting the system down completely, disconnect power for a few minutes, then starting back up and compare readings again.

I'd be more interested in a reading if the value changes during operation and in sync with something the system is doing.
Sort by date Sort by votes
D

drea.drechsler

Champion
Oct 16, 2017
9,841
2,647
54,790
The most likely is they are unused and unconnected sense circuits on the monitoring chip, but it depends on your motherboard. Those that are real voltages maybe someone with the same motherboard has figured it out; you can also compare readings to HWInfo and Aida or other utilities to see if one of them has it figured out.


 
Upvote 0 Downvote
S

sotfoun10

Prominent
Oct 6, 2017
130
0
690
Hi thanks for the quick reply ! Should I worry about them because for the past 2 months the vin6 value was 2.54V but today it is 1.78V both in HWmonitor and in OCCT stress test. I can't see any performance related issues but is everything normal ?
 
Upvote 0 Downvote
D

drea.drechsler

Champion
Oct 16, 2017
9,841
2,647
54,790


Those disconnected sense lines can read random values that change from power-off boot to power-off boot. Try shutting the system down completely, disconnect power for a few minutes, then starting back up and compare readings again.

I'd be more interested in a reading if the value changes during operation and in sync with something the system is doing.
 
Upvote 0 Downvote
Solution
S

sotfoun10

Prominent
Oct 6, 2017
130
0
690
No no the Vin 6 value never changes it just does what I already told you ...while for the past few months it was 2.54V all the time now it is 1.78V all the time. Because I don't want to waste you time answer me just if I should worry about this or let it be. From what I can understand of what you are saying these are not used at all so they shouldn't cause any problems whichever value they get right? Thanks again for your help!
 
Upvote 0 Downvote
S

sotfoun10

Prominent
Oct 6, 2017
130
0
690
I have an update I did what you told me and it suddenly went back to 2.4V so no I'm sure that it is nothing serious! Thank you so much for your help. Just tell me if these disconnected use lines have any use or are just completely irrelevant. Thanks again
 
Upvote 0 Downvote
rgd1101

rgd1101

Don't
Moderator
Nov 7, 2011
73,291
3,851
176,290
MERGED QUESTION
Question from sotfoun10 : "Trying to understand Voltage readings help"



 
Upvote 0 Downvote
rgd1101

rgd1101

Don't
Moderator
Nov 7, 2011
73,291
3,851
176,290
MERGED QUESTION
Question from sotfoun10 : "Strange Hwmonitor voltage reading"





 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom