Sys 1 & 3 fan not working..
- Thread starter Ricster-a
- Start date
rocktalkrock
Judicious
- Jul 4, 2017
- 6,077
- 280
- 36,640
In your UEFI bios, under "M.I.T. > PC Health Status" on of the options you will see is "2nd/3rd System Fan Speed Control".
Allows you to determine whether to enable the fan speed control function for the system fan connected to
the SYS_FAN2/3 connector and adjust the fan speed.
>> Normal - Allows the fan to run at different speeds according to the system temperature. (Default)
>> Silent - Allows the fan to run at slow speeds.
>> Manual - Allows you to control the fan speed under the Slope PWM item.
>> Disabled - Allows the fan to run at full speeds.
Allows you to determine whether to enable the fan speed control function for the system fan connected to
the SYS_FAN2/3 connector and adjust the fan speed.
>> Normal - Allows the fan to run at different speeds according to the system temperature. (Default)
>> Silent - Allows the fan to run at slow speeds.
>> Manual - Allows you to control the fan speed under the Slope PWM item.
>> Disabled - Allows the fan to run at full speeds.
rocktalkrock
Judicious
- Jul 4, 2017
- 6,077
- 280
- 36,640
Do you have the Gigabyte EasyTune software utility installed in Windows? It also has a Smart Fan tab.
The Smart Fan tab allows you to specify a Smart Fan mode. The Calibrate menu displays
the detected linear fan speed for the fans on the motherboard from the fastest to the slowest.
The Advanced menu allows you to set temperature thresholds, based on which the fan speed
can be changed linearly.
rocktalkrock
Judicious
- Jul 4, 2017
- 6,077
- 280
- 36,640
When you say "in the bios both fans are recognized", how are they recognized? If the fans are not plugged into 1 & 3 how does it look different?
TRENDING THREADS
-
-
News Firefox user loses 7,470 opened tabs saved over two years after they can’t restore browsing session- Started by Admin
- Replies: 59
-
Facebook
Twitter
Instagram