Dear all!
Here is my setup:
Mobo: MSI B350 PC Mate
CPU: Ryzen 5 1600
RAM: HyperX 8GB Predator DDR4 3000MHz CL15 KIT HX430C15PB3K2/8
The RAM is in the QVL list of Mobo. It says that if I use this memory with Ryzen CPU (it's accomplished actually), then it could possess 2933 MHz by using of XMP Profile 1 (okay, I know it's not an Intel CPU). The problem is that it can't. If I set the timing manually on 1.35V, 2933 MHz, with a not so good 18-20-20-20-36 timing, still doesn't boot. The maximum what I can reach is 2667 Mhz, 14-16-16-16-34.
Is it possible somehow to get the 2933 Mhz? Should I rise the RAM voltage or what?
The SoC voltage is set 'auto' in BIOS, about 1.05V.
Thanks in advance!
Here is my setup:
Mobo: MSI B350 PC Mate
CPU: Ryzen 5 1600
RAM: HyperX 8GB Predator DDR4 3000MHz CL15 KIT HX430C15PB3K2/8
The RAM is in the QVL list of Mobo. It says that if I use this memory with Ryzen CPU (it's accomplished actually), then it could possess 2933 MHz by using of XMP Profile 1 (okay, I know it's not an Intel CPU). The problem is that it can't. If I set the timing manually on 1.35V, 2933 MHz, with a not so good 18-20-20-20-36 timing, still doesn't boot. The maximum what I can reach is 2667 Mhz, 14-16-16-16-34.
Is it possible somehow to get the 2933 Mhz? Should I rise the RAM voltage or what?
The SoC voltage is set 'auto' in BIOS, about 1.05V.
Thanks in advance!