Hello,
I would like some help for the pc I have recently bought. I've bought a PC with these specs:
Intel DQ77MK motherboard
Intel Core i7-3770 CPU - 3.4Ghz (3.9Ghz Turbo)
16GB (4x4GB) DDR3 RAM
240GB SSD drive – for Operating System
3TB Toshiba 7200rpm Hard Drive – for Data
Nvidia GTX 1050 Graphics Card (2GB)
802.11n WiFi
DVD +/- RW Drive
I have installed windows 10 on the PC. And there were no problems with the installing. But when I turned off the PC and I put it back on, the PC doesn't get connected with the monitor. The monitor doesn't receive a signal.
So I've got two beeps and a pause and two beeps when I wanted to start is. So I've checked if everything was in place, the memory and the graphic card, but it doesn't make any difference. So I have removed the video card, and it started once. The faillure was the drivers of the graphic cards weren't working well. So I turned it down, and I've put the PC back in place. And I turned it on, without the graphic card. It started for ones, but now it doesnt give a signal to the monitor. It isn't beeping, I just have a black screen. Can somebody help me with this problem? With the problem of the graphic card, and the problem that is doesn't broadcast a signal to the monitor.
I am sorry for the bad English, I am from the Netherlands, so I hope you understand the problem and thank you for the help.
Best regards,
Susan
I would like some help for the pc I have recently bought. I've bought a PC with these specs:
Intel DQ77MK motherboard
Intel Core i7-3770 CPU - 3.4Ghz (3.9Ghz Turbo)
16GB (4x4GB) DDR3 RAM
240GB SSD drive – for Operating System
3TB Toshiba 7200rpm Hard Drive – for Data
Nvidia GTX 1050 Graphics Card (2GB)
802.11n WiFi
DVD +/- RW Drive
I have installed windows 10 on the PC. And there were no problems with the installing. But when I turned off the PC and I put it back on, the PC doesn't get connected with the monitor. The monitor doesn't receive a signal.
So I've got two beeps and a pause and two beeps when I wanted to start is. So I've checked if everything was in place, the memory and the graphic card, but it doesn't make any difference. So I have removed the video card, and it started once. The faillure was the drivers of the graphic cards weren't working well. So I turned it down, and I've put the PC back in place. And I turned it on, without the graphic card. It started for ones, but now it doesnt give a signal to the monitor. It isn't beeping, I just have a black screen. Can somebody help me with this problem? With the problem of the graphic card, and the problem that is doesn't broadcast a signal to the monitor.
I am sorry for the bad English, I am from the Netherlands, so I hope you understand the problem and thank you for the help.
Best regards,
Susan