- Dec 4, 2017
- 8
- 0
- 510
so i had 2 SATA hdds connect to SATA0 and SATA1 and everything was peachy
then i decided id use a SSD as the OD drive and use the 2 HDD's as storage.
i plugged in the SSD in SATA0 and one of the HDD's in SATA1 was able to install the OS on SSD and managed to get into windows find the HDD and format it
after a reboot the HDD was no longer there so i checked in BIOS and it wasnt detecting so i tried the other HDD again not detecting tried other SATA ports nothing , tried 4 HDD's in different ways everything from changing cables changing ports doing single HDD at a time even tested the HDDs on another PC and they are detected on another PC
so really only the SSD works now if i plug it in any port but no HDDs
in BIOS ive tried all the IDE//SATA settings with every port still not detecting ive Cleared CMOS have the newest Bios version ive pretty much tried every thing and been online trying to look up any solution but its been 3 days now and well over 24 hours on headaches and im at a loss LOL
when SSD is disconnected HDDs dont detect either
any help would be amazing PLEASEEE
IDE config in Bios is
SATA#1 Configuration [Enhanced]
Configure SATA#1 as [IDE]
SATA#2 Configuration [Enhanced]
my Motherboard is a supermicro 8xdtt-f
ive read the manual but maybe i missed something on SSD's and HDD's
if needed i can provide images on my Bios
thanks for any help at all
PS im sorry if i repeated myself in this post
then i decided id use a SSD as the OD drive and use the 2 HDD's as storage.
i plugged in the SSD in SATA0 and one of the HDD's in SATA1 was able to install the OS on SSD and managed to get into windows find the HDD and format it
after a reboot the HDD was no longer there so i checked in BIOS and it wasnt detecting so i tried the other HDD again not detecting tried other SATA ports nothing , tried 4 HDD's in different ways everything from changing cables changing ports doing single HDD at a time even tested the HDDs on another PC and they are detected on another PC
so really only the SSD works now if i plug it in any port but no HDDs
in BIOS ive tried all the IDE//SATA settings with every port still not detecting ive Cleared CMOS have the newest Bios version ive pretty much tried every thing and been online trying to look up any solution but its been 3 days now and well over 24 hours on headaches and im at a loss LOL
when SSD is disconnected HDDs dont detect either
any help would be amazing PLEASEEE
IDE config in Bios is
SATA#1 Configuration [Enhanced]
Configure SATA#1 as [IDE]
SATA#2 Configuration [Enhanced]
my Motherboard is a supermicro 8xdtt-f
ive read the manual but maybe i missed something on SSD's and HDD's
if needed i can provide images on my Bios
thanks for any help at all
PS im sorry if i repeated myself in this post
Facebook
Twitter
Instagram