Corsair 200R Motherboard Standoff Problem

eoroto123 · Dec 6, 2017

This is my first time building a Computer, I decided to buy a Asus B350 Prime Plus with the Corsair
Carbide 200R. So basically since the B350 board is a little shorter and only uses 6 standoffs the other 3 none removable preinstalled standoffs will stick out a little from the right side of the board. What should i do?

DRagor · Dec 6, 2017

As long as the standoffs are not under the board, you can leave them be. However, if those 3 standoffs touch the mobo in any place, you have to remove them, UNLESS they are non-metal.

eoroto123 · Dec 6, 2017

DRagor :

That's the problem, The standoffs are under the mobo. Since the standoffs are none removable i guess i'll just have to get another case.

DRagor · Dec 6, 2017

Are you sure they are not removable? I didn't found anything on it in case manual, but that would be strange. What if you had microATX board - you would have to move the standoffs for sure, they would not fit as they are.

Zerk2012 · Dec 6, 2017

eoroto123 :

That case does not use regular standoffs their just raised spots in the case.
Just use the screws you need everything is fine no problems.

Search

Corsair 200R Motherboard Standoff Problem

eoroto123

Prominent

Zerk2012

DRagor

Polypheme

eoroto123

Prominent

DRagor

Polypheme

Zerk2012

Titan

TRENDING THREADS

Latest posts

Moderators online

Share this page