My Mainboard in Gygabyte H61M-ds2 rev 2.0.
Once due to voltage problem my Power Supply as well asAll SATA ports failed to work.
Later I Installed New power supply but noticed that SATA HDD was not detected.
My HDD, SATA Cable, Power Supply (NEW) is ok. But HDD is not detect by Mainboard.
I tried to reinsert the Bios Battery But Does not work.
Tried to Update to Bios version F10a From https://www.gigabyte.com/Motherboard/GA-H61M-DS2-rev-20#support-dl, but it shows that it is a older version.
So what can I do in such situation.
1. Can I use a SATA to IDE Converter and Insert my HDD to IDE port of mainboard?
2. Can I use a PCI to SATA Adapter to Install HDD into PCI port.
Does it may create any problem in near future i.e. overheating, connection problem etc etc.
Once due to voltage problem my Power Supply as well asAll SATA ports failed to work.
Later I Installed New power supply but noticed that SATA HDD was not detected.
My HDD, SATA Cable, Power Supply (NEW) is ok. But HDD is not detect by Mainboard.
I tried to reinsert the Bios Battery But Does not work.
Tried to Update to Bios version F10a From https://www.gigabyte.com/Motherboard/GA-H61M-DS2-rev-20#support-dl, but it shows that it is a older version.
So what can I do in such situation.
1. Can I use a SATA to IDE Converter and Insert my HDD to IDE port of mainboard?
2. Can I use a PCI to SATA Adapter to Install HDD into PCI port.
Does it may create any problem in near future i.e. overheating, connection problem etc etc.