My PC config
Gigabyte GA H110M-S2(rev 1.0)
Intel Core i5 6400 Socket LGA1151 2.70 GHz Processor
HyperX Fury Black 8GB 2133MHz CL14 DDR4
Gigabyte GeForce GT730 2GB
Corsair VS550 550-Watt Power Supply
I had notification to update Bios, so i decided to update. But during installation my PC froze and windows was not responding so i had shutdown the pc forcefully ( this where i messed up)
After restarting, PC didn't Post Anything. On the monitor "No signal"
I tried clear cmos by using jumper in CLR_CMOS on motherboard and even removed cmos Battery and waited for 20 min
reinserted cmos battery, removed jumper and restarted the pc.
But no use, Problem still existed
Removed other parts except ram, cpu and it still didn't worked
Any Suggestion guys. Need help.
Gigabyte GA H110M-S2(rev 1.0)
Intel Core i5 6400 Socket LGA1151 2.70 GHz Processor
HyperX Fury Black 8GB 2133MHz CL14 DDR4
Gigabyte GeForce GT730 2GB
Corsair VS550 550-Watt Power Supply
I had notification to update Bios, so i decided to update. But during installation my PC froze and windows was not responding so i had shutdown the pc forcefully ( this where i messed up)
After restarting, PC didn't Post Anything. On the monitor "No signal"
I tried clear cmos by using jumper in CLR_CMOS on motherboard and even removed cmos Battery and waited for 20 min
reinserted cmos battery, removed jumper and restarted the pc.
But no use, Problem still existed
Removed other parts except ram, cpu and it still didn't worked
Any Suggestion guys. Need help.
Facebook
Twitter
Instagram