Hi guys,
motherboard: MSI z170a SLI
1.st package: G-SKILL f4-3000c15d (CL15-16-16-35) 1.35V
2.nd package: G-SKILL f4-3200c16d (CL16-18-18-38) 1.35V
Now they work together on 2133mhz. My question - is there a possibility how to get it on 3000? Thx
So I enabled XMP and manually set to 3000MHz...till now everything ok, memtest without errors, I'll let it be, make some benchmarks, games etc. and than let you know..
Even mixing the same make and model RAM bought separately can have problems or can work fine, all you can do is try. If you do run into issues you can try overvolting and loosening the timings but its trial and error if it works
So I enabled XMP and manually set to 3000MHz...till now everything ok, memtest without errors, I'll let it be, make some benchmarks, games etc. and than let you know..
So I enabled XMP and manually set to 3000MHz...till now everything ok, memtest without errors, I'll let it be, make some benchmarks, games etc. and than let you know..
if its booted and cleared some test then it will work without any issues
So I enabled XMP and manually set to 3000MHz...till now everything ok, memtest without errors, I'll let it be, make some benchmarks, games etc. and than let you know..
If you start having problems increase the voltage by 0.02 volts.