Ryzen 3 1200 cant post ANY voltage settings on 3.9mhz.Help?

Toggle sidebar Toggle sidebar
D

dave.cam.camarro

Prominent
Dec 21, 2017
10
0
510
I managed to have a stable (at least for what I can see , did some stress test as per what Ive researched) Now I am @ 3.8mhz + 1.28voltage stable. I can post 3.8 @ 1.20 so I tried to reach 3.9mhz since I thought I still have a lot of room for my voltage if needed. Unfortunately I CANNOT post ANY 3.9mhz settings from 1.2 - 1.45! Am I missing something here? Is that how bad I lost the silicon lottery?

Specs:
R3 1200
MSI VDH-PRO B350m
750Ti
klev 4GB x 2 2400mhz
 
Solution
1LiquidPC
Likely hit the wall with Ryzen, 1st Gen. Not all chips can get to 4Ghz, let alone higher. I needed 1.38v for my Ryzen 7 1700 to be stable at 3.85Ghz. Even 1.45v wasnt stable at 4Ghz. I did have memory at 3200 CL14, but had intermittent POST issues.
Sort by date Sort by votes
clarkjd

clarkjd

Splendid
Dec 7, 2005
6,486
34
28,490

Being able to overclock to a certain level is never guaranteed.( if it was, then that level would be stock!)
Have you tried loosening the ram timings?

 
Upvote 0 Downvote
D

dave.cam.camarro

Prominent
Dec 21, 2017
10
0
510


you mean lowering my ramspeed to 2133? I just left my timings to 17171739 never touched any settings for ram as of now.
 
Upvote 0 Downvote
clarkjd

clarkjd

Splendid
Dec 7, 2005
6,486
34
28,490

I meant loosening your timings, not the ramspeed.

 
Upvote 0 Downvote
D

dave.cam.camarro

Prominent
Dec 21, 2017
10
0
510


Just tried to manually select the lowest ram timings 14-16-16-37 (17-17-17-39 default) from the Memory try it! but still have no luck. Is there any better timing except for those? I can put it manually but I don't know what numbers are okay.
 
Upvote 0 Downvote
clarkjd

clarkjd

Splendid
Dec 7, 2005
6,486
34
28,490

By going to 14-16-16-37, you actually tightened the timings!:( You need to go bigger numbers, like 19-19-19-45 in order to loosen them.:)

 
Upvote 0 Downvote
1LiquidPC

1LiquidPC

Splendid
Oct 11, 2014
5,314
83
31,590
Likely hit the wall with Ryzen, 1st Gen. Not all chips can get to 4Ghz, let alone higher. I needed 1.38v for my Ryzen 7 1700 to be stable at 3.85Ghz. Even 1.45v wasnt stable at 4Ghz. I did have memory at 3200 CL14, but had intermittent POST issues.
 
Upvote 0 Downvote
Solution
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom