Hello,
I'm stuck on a problem with my brand new Asus Tuf Z270 mark 2.
I got my new build with I7 7700K 4.20 GHz / Zotac GTX 1060 6G AMP edition / 2x Corsair Vengeance LPX 8Gb DDR4 2400Mhz CMK8GX4M1A2400C14 / and the Asus Tuf.
When I want to start my computer, everything is working fine, the CPU led goes on and off, but then the DRAM yellow led switch on and I have nothing on my monitor. I looked for answers in the manual and here, and I did nearly everything that was advised to do in this case ( the MemOK button, remove the GPU, remove the RAM, check the RAM slots for A1/B1 A2/B2 ...).
I noticed that when I remove completely the RAM, I have no beep sound to say there is an error, and, as I can't access the BIOS, I'm starting to think that maybe, the problem is because of the BIOS ? I'm suposed to be on 0906, as indicated on the MB itself.
The only thing I haven't tried is to install a new version of the BIOS ( there is a new1009 version suposed to improve device compatibility ), and if the problem if from a missing BIOS, that might fix it; what do you think ?
Thanks for the help, Jak.
I'm stuck on a problem with my brand new Asus Tuf Z270 mark 2.
I got my new build with I7 7700K 4.20 GHz / Zotac GTX 1060 6G AMP edition / 2x Corsair Vengeance LPX 8Gb DDR4 2400Mhz CMK8GX4M1A2400C14 / and the Asus Tuf.
When I want to start my computer, everything is working fine, the CPU led goes on and off, but then the DRAM yellow led switch on and I have nothing on my monitor. I looked for answers in the manual and here, and I did nearly everything that was advised to do in this case ( the MemOK button, remove the GPU, remove the RAM, check the RAM slots for A1/B1 A2/B2 ...).
I noticed that when I remove completely the RAM, I have no beep sound to say there is an error, and, as I can't access the BIOS, I'm starting to think that maybe, the problem is because of the BIOS ? I'm suposed to be on 0906, as indicated on the MB itself.
The only thing I haven't tried is to install a new version of the BIOS ( there is a new1009 version suposed to improve device compatibility ), and if the problem if from a missing BIOS, that might fix it; what do you think ?
Thanks for the help, Jak.
Facebook
Twitter
Instagram