So im currently running an undervolt using XTU but the problem is those settings dont save after i restart my PC so that is a bit annoying.
So how would i go about applying these settings
https://gyazo.com/0e919fa0ff096c23b0a0e41d49981b08
using my BIOS. In the bios i got 3 options for the CPU Voltage, Auto, Adaptive, Offset and manual
Another thing to note is that my BIOS says the CPU voltage is 1.120 meanwhile HWMonitor says its 1.2
Edit: So i went into the BIOS and changed it to offset and set the value to -0.170. Now HWMonitor shows 1.050 on the VCore and CPUZ shows 1.050 as the CPU Voltage. But for some reason the Voltages under the CPU section in HWMonitor shows the voltage as 1.2
So how would i go about applying these settings
https://gyazo.com/0e919fa0ff096c23b0a0e41d49981b08
using my BIOS. In the bios i got 3 options for the CPU Voltage, Auto, Adaptive, Offset and manual
Another thing to note is that my BIOS says the CPU voltage is 1.120 meanwhile HWMonitor says its 1.2
Edit: So i went into the BIOS and changed it to offset and set the value to -0.170. Now HWMonitor shows 1.050 on the VCore and CPUZ shows 1.050 as the CPU Voltage. But for some reason the Voltages under the CPU section in HWMonitor shows the voltage as 1.2