Hello
I have a problem with my recently purchased nzxt kraken x62 and could use some help.
I have a relatively new system that I decided to upgrade to liquid cooling. Before that, I had a noctua NH-D14. After installing the cooler and turning the pc on, it shut down after around 20 seconds.
I triple checked that everything was connected correctly, and the pc still shuts down after a while. I managed to get to bios and saw an error message along the lines of: "cpu fan error".
The temperatures seen in bios were around 80 degrees celsius and will start going up after a while.
I re-installed everything a couple of times but every time the same thing happens.
I have absolutely no idea what could be wrong, I am currently running the system with the old noctua cooler and I have no problems what so ever.
Any help is greatly appreciated
I have a problem with my recently purchased nzxt kraken x62 and could use some help.
I have a relatively new system that I decided to upgrade to liquid cooling. Before that, I had a noctua NH-D14. After installing the cooler and turning the pc on, it shut down after around 20 seconds.
I triple checked that everything was connected correctly, and the pc still shuts down after a while. I managed to get to bios and saw an error message along the lines of: "cpu fan error".
The temperatures seen in bios were around 80 degrees celsius and will start going up after a while.
I re-installed everything a couple of times but every time the same thing happens.
I have absolutely no idea what could be wrong, I am currently running the system with the old noctua cooler and I have no problems what so ever.
Any help is greatly appreciated