- Jun 27, 2014
- 38
- 0
- 10,530
Hi guys I need some help I installed a hyper 212 Evo on my CPU (the first time too tight) and now I'm getting code 55 with black screen not even bios, I looked with a magnifier the motherboard and as far as I can notice there's no bent pins, I removed the VGA restarted the bios and tried going on bios without any cooler just CPU, also removed 1 ram tried with both in the first of both pairs of ram locks, and still getting 55 any idea what else I can do?
The setup is
3770k
Hyper Evo 212 (not using the cooler now)
Hyperx Blu 2x4gb
Maximus v formula
I know this hardware is pretty old already and I was expecting failure from it but everything works fine until I made my magic (dumb)
The setup is
3770k
Hyper Evo 212 (not using the cooler now)
Hyperx Blu 2x4gb
Maximus v formula
I know this hardware is pretty old already and I was expecting failure from it but everything works fine until I made my magic (dumb)
Facebook
Twitter
Instagram