This is a 3 year old PC, on start up today I had an overclocking error which is an occasional issue caused by Joysick plugged into USB, I went through BIOS saved settings, removed Joystick and restarted.
I was then faced with an A2 Qcode which is an IDE/SCSI error, I restarted several times and tried to use F2 or Delete keys to get into BIOS, no luck.
I opened up the PC and unplugged all HDD's, restarted and got a 99 qcode super IO initialisation. I then plugged the drives back in, rebooted and am now back to qcode A2
I have found a post concerning a similar issue on these forums but no solution was posted
http://www.tomshardware.co.uk/answers/id-2476285/asus-x99-deluxe-stuck-codes-boot-device-led.html?xtor=EREC-8889
I'm now at a loss to the issue that has developed, any help would be greatly appreciated.
I was then faced with an A2 Qcode which is an IDE/SCSI error, I restarted several times and tried to use F2 or Delete keys to get into BIOS, no luck.
I opened up the PC and unplugged all HDD's, restarted and got a 99 qcode super IO initialisation. I then plugged the drives back in, rebooted and am now back to qcode A2
I have found a post concerning a similar issue on these forums but no solution was posted
http://www.tomshardware.co.uk/answers/id-2476285/asus-x99-deluxe-stuck-codes-boot-device-led.html?xtor=EREC-8889
I'm now at a loss to the issue that has developed, any help would be greatly appreciated.
Facebook
Twitter
Instagram