What to do after you build your PC?

caezar24

Prominent
Jan 11, 2018
8
0
510
So I understand that you have to purchase a window 10 product key license. I understand that you have to place it on a flash drive and upload it to another computer. I have two questions:

1. Can I put an empty 20gb flash-drive into my windows vista computer and install windows 10 unto the flash drive with my product key already purchased?

2. How would I install the mother board software unto my new computer that has no optical drives?

3. Can I also put the optical disc for the motherboard software in my windows vista computer and some how use windows vista to transfer the mother board software from the disk its on to a flash drive and then just plug that flash-drive into the newly built computer?

4. Should I install windows 10 first on the new computer and install the motherboard software on it?

 
Solution
1. Yes
2. USB Flash drive into computer, go into BIOS and change boot order for the USB as the first boot drive.
3. The only software I'd get from the disk is the LAN drivers (if needed) then get everything directly from the motherboard manufacturer website.
4. Yes.

WildCard999

Titan
Moderator
1. Yes
2. USB Flash drive into computer, go into BIOS and change boot order for the USB as the first boot drive.
3. The only software I'd get from the disk is the LAN drivers (if needed) then get everything directly from the motherboard manufacturer website.
4. Yes.
 
Solution