Questions about compatibility of new motherboard with old cpu front panel

Toggle sidebar Toggle sidebar
H

hiaditya21998

Prominent
Dec 27, 2017
15
0
510
Hi there! I ordered a new gigabyte h110 S2. I wanted to replace it with my pre built lenevo motherboard, but I have a feeling that the front panel may not fit well... I'm sharing the pictures in the link. The black connector is for the front panel power button which has 2 LEDs, and the button. There is no restart button. The orange socket is the audio (front). That also seems to have some compatibility issues. I haven't replaced it yet. Please tell me will it be safe for the motherboard if I replace it? Also, the front usb is fitting and has no problem. The current Mobo I have is a L-IG41M, DDR3 version.
https://1drv.ms/f/s!AvnqWvg-2VjqgegIDyMkik0KpVhYJQ
Thanks in advanced guys!!
 
Solution
B
Personally, I will not do it since the pin of black connector do not match to connector on mobo. On the new case, power and ground does not matter for POWER and RESET if they are reverse. I think it is better you buy a new case.

Sort by date Sort by votes
H

hiaditya21998

Prominent
Dec 27, 2017
15
0
510

I do have a new ram and processor. Ddr4 and Pentium g4400
My issue right now is just the front power button socket. Please refer to the pics as not all of the holes in the socket have the wires connected because of absent metal plates. That's why is took pics from angles. The reflection because of flash also has no pin in the hole. It's just plastic.
 
Upvote 0 Downvote
B

Bob125484

Honorable
Jun 13, 2015
712
17
11,365
Personally, I will not do it since the pin of black connector do not match to connector on mobo. On the new case, power and ground does not matter for POWER and RESET if they are reverse. I think it is better you buy a new case.

 
Upvote 0 Downvote
Solution
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom