- Nov 4, 2017
- 25
- 0
- 530
Hello all.
Currently I have two Asiahorse 120mm fans in the front of my case with a deepcool gammax air cooler on my CPU.
I bought a Corsair H115i to install once my delidded chip comes back from SiliconLottery.
I'm planning on running a pushpull config on my radiator once installed on my newly delidded and binned chip.
Instead of buying four new 140mm fans to mount on the radiator (want RGB), do you guys think I'll mess anything up if I keep the 120mm (AsiaHorse LED) fans in the front as the push (intake) fans, and then install Corsair LL140 140mm RGB fans to pull from the radiator. So I know that this will probably stress the lower output fans, but how much of an issue is this do you think? I was thinking maybe they will just fail faster and then I'll buy matching fans down the road. The reason for this is because if I was to buy four LL140 fans, those fans aren't cheap! Or should I just buy four matching fans, or perhaps switch to the ML120 fans and just buy four of those. Please give me your thoughts.
Specs of my PC build are below, please let me know if you need more info.
INWIN 805: Front Panel Modified for Higher Air Flow Rate
Processor: Stock Clock Rates & Voltages. KABY LAKE INTEL 7TH GENERATION CORE I7-7700K
Cooler: (Acquired Another Fan for Push Pull Config): DEEPCOOL GAMMAXX 400 CPU AIR COOLER WITH 4 HEAT PIPES 120MM PWM FAN
SSD: SAMSUNG 960 EVO SERIES - 500GB NWMe M.2 INTERNAL SSD (MZ-V6E500BW)
FANS: 120MM PWM FANS ASIAHORSE SOLAR ECLIPSE HYDAULIC BEARING QUIET 1800 PRM 4 PIN CONNECTORS WITH ANTI VIBRATION RUBBER.
Power Supply: EGA SUPERNOVA 650 G2 80+ GOLD 650W FULLY MODULAAR EVGA ECO MODE 7 YEAR WARRANTY FREE POWER ON SELF TESTER 220-G2-0650-Y1 | 90% EFFICIENCY
RAM: XMP Enabled CORSAIR VENGENCE RGB 16GB DDR4 3466 (PC4-2700) C16-INTEL 100/200 SERIES PC MEMORY CMR16GX4M2C3466C16
Graphics: ASUS GEFORCE GTX 1080 8GB ROG STRIX GRAPHICS CARD (STRIX-GTX1080-A8G-GAMING)
Currently I have two Asiahorse 120mm fans in the front of my case with a deepcool gammax air cooler on my CPU.
I bought a Corsair H115i to install once my delidded chip comes back from SiliconLottery.
I'm planning on running a pushpull config on my radiator once installed on my newly delidded and binned chip.
Instead of buying four new 140mm fans to mount on the radiator (want RGB), do you guys think I'll mess anything up if I keep the 120mm (AsiaHorse LED) fans in the front as the push (intake) fans, and then install Corsair LL140 140mm RGB fans to pull from the radiator. So I know that this will probably stress the lower output fans, but how much of an issue is this do you think? I was thinking maybe they will just fail faster and then I'll buy matching fans down the road. The reason for this is because if I was to buy four LL140 fans, those fans aren't cheap! Or should I just buy four matching fans, or perhaps switch to the ML120 fans and just buy four of those. Please give me your thoughts.
Specs of my PC build are below, please let me know if you need more info.
INWIN 805: Front Panel Modified for Higher Air Flow Rate
Processor: Stock Clock Rates & Voltages. KABY LAKE INTEL 7TH GENERATION CORE I7-7700K
Cooler: (Acquired Another Fan for Push Pull Config): DEEPCOOL GAMMAXX 400 CPU AIR COOLER WITH 4 HEAT PIPES 120MM PWM FAN
SSD: SAMSUNG 960 EVO SERIES - 500GB NWMe M.2 INTERNAL SSD (MZ-V6E500BW)
FANS: 120MM PWM FANS ASIAHORSE SOLAR ECLIPSE HYDAULIC BEARING QUIET 1800 PRM 4 PIN CONNECTORS WITH ANTI VIBRATION RUBBER.
Power Supply: EGA SUPERNOVA 650 G2 80+ GOLD 650W FULLY MODULAAR EVGA ECO MODE 7 YEAR WARRANTY FREE POWER ON SELF TESTER 220-G2-0650-Y1 | 90% EFFICIENCY
RAM: XMP Enabled CORSAIR VENGENCE RGB 16GB DDR4 3466 (PC4-2700) C16-INTEL 100/200 SERIES PC MEMORY CMR16GX4M2C3466C16
Graphics: ASUS GEFORCE GTX 1080 8GB ROG STRIX GRAPHICS CARD (STRIX-GTX1080-A8G-GAMING)
Facebook
Twitter
Instagram