Corsair Link overwrote my default Fan settings, then messed them up

Sephi_Toderas

Distinguished
Nov 14, 2014
141
1
18,695
Hello,

I got a H110i Corsair in my PC with two corsair fans and additionally two Noctua Fans.

My PC was very silent when I was not playing games. Today I finally installed Corsair Link to check some temperatures but noticed that my PC is louder and it's breathing, meaning that every 10-20 seconds it starts up really fast for 1-4 seconds then goes back to silent.

I removed Corsair Link and since then all the fans run at 100%. I tried to do BIOS default, still the Fans fo 100%

I re-installed Corsair Link... and the problems it's the same, it's breathing again.

HELP
 

Sephi_Toderas

Distinguished
Nov 14, 2014
141
1
18,695
All right so it seems I have found the problem.

This was the setup initially :

Watercooler was connected to the SysFan 3
Noctua 1 was connected to SysFan 1
Noctua 2 was connected to CPU Fan

So I've moved them around to and disabled Corsair Link so it does not boot at Windows start :

Watercooler to Pump Fan
Noctua 1 to Sysfan 1
Noctua 2 to Sysfan 2

So far there's no breathing. Testing this for 3 hours now with two reboots.
 

Vic 40

Titan
Ambassador

Nothing connected to the cpu fan header?
What motherboard?

If it's fine for you okay,but the board might have a cpu fan header+ pump header.
 

Sephi_Toderas

Distinguished
Nov 14, 2014
141
1
18,695


The pump has also conenctors that go to the PSU.

Everything seems to be working