Unable to connect to modem Webpage (Westell 7500)

Toggle sidebar Toggle sidebar
J

jccmu5

Prominent
Jan 14, 2018
1
0
510
Hello, I have purchased a new router to extend the range of my WIFI in my home. I currently have a Westell 7500 (Modem/Router) I am attempting to bypass the router in the Westell and use it as just a modem to connect my Router to. However, when I plug in my IP address 10.0.0.1 (checked my network settings to verify this is accurate) it will not open the web page, simply states that page can not be reached. I have also tried the other suggested IP address 192.168.0.0.1 and 192.168.0.1.1 all give the same error. I have also tried to clear my cache before attempting , any thoughts on how to get past this are appreciated.
 
Solution
The Paladin
in combined modem/router provided by isp, some model will permit you to turn off the dns/routing, but 99% do not. in most cases when you want to use your router for the wifi/connections the only thing I can suggest is;

1, get a compatible cable mode, and use your own router and cable modem. (seek a web page of compatible modems for your ISP)
2. set the new router to be AP mode, connect it wired to the cable-modem/router from ISp, turn off the Wi-Fi from your ISP modem/router and use all options from your own router , this way the cable-modem/router combo will continue to deal with isp, and dns requests and your own router will run your internal network traffic.

set your own router IP address in the same range and make it x.x.x.200 so...
Sort by date Sort by votes
A

Alabalcho

Titan
Jan 13, 2011
14,019
435
76,290
Googling for your router shows a lot of ISP-specific links. If your router was provided by your ISP, it might be locked / not default.

Randomly picking addresses will not help. Open "Command prompt", execute "IPCONFIG", and look for a line reading "Default Gateway" - this is your router.
 
Upvote 0 Downvote
The Paladin

The Paladin

Polypheme
Ambassador
Oct 5, 2016
9,663
60
67,340
www.texastandyrestorations.org
in combined modem/router provided by isp, some model will permit you to turn off the dns/routing, but 99% do not. in most cases when you want to use your router for the wifi/connections the only thing I can suggest is;

1, get a compatible cable mode, and use your own router and cable modem. (seek a web page of compatible modems for your ISP)
2. set the new router to be AP mode, connect it wired to the cable-modem/router from ISp, turn off the Wi-Fi from your ISP modem/router and use all options from your own router , this way the cable-modem/router combo will continue to deal with isp, and dns requests and your own router will run your internal network traffic.

set your own router IP address in the same range and make it x.x.x.200 so you can retain control over it function and access a web page address that will not conflict with modem nor isp router part.

 
Upvote 0 Downvote
Solution
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom