Graphics card overclocking help???

Toggle sidebar Toggle sidebar
Solution
Dunlop0078
I would increase each by 50mhz increments, test for stability, then repeat. Once it becomes unstable back off the clocks until it is stable.

There is no specific number I can give you, all 960s will overclock to slightly different figures.

You will need to unlock voltage control in msi afterburners settings to change it. If you want, increasing the voltage may allow you to get higher overclocks but it will also increase heat.

If it starts to get warm under load say over 80c. Then I would set up a custom fan profile to keep it a bit cooler under load.
Sort by date Sort by votes
Dunlop0078

Dunlop0078

Titan
Ambassador
Feb 13, 2014
13,306
146
70,990
I would increase each by 50mhz increments, test for stability, then repeat. Once it becomes unstable back off the clocks until it is stable.

There is no specific number I can give you, all 960s will overclock to slightly different figures.

You will need to unlock voltage control in msi afterburners settings to change it. If you want, increasing the voltage may allow you to get higher overclocks but it will also increase heat.

If it starts to get warm under load say over 80c. Then I would set up a custom fan profile to keep it a bit cooler under load.
 
Upvote 0 Downvote
Solution
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom